0.5mm pitch flexible flat cable connector hanxia HX FPC 0.5-12P HYH2.0 designed for electronic component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable connections. The product is manufactured by Shenzhen Hanxia Electronic Co., Ltd.

Product Attributes

Brand: Hanxia Electronic (HX)
Origin: Shenzhen, China
Certifications: UL 94V-0 (for LCP material)

Technical Specifications

Item	Requirement	Test Condition	Specification
3. RATINGS
Rated Voltage (MAX)	AC/DC (Virtual value) 50Hz	50V
Rated Current (MAX)		0.5A
Ambient temperature Range		-25+85
4. PERFORMANCE
4.1 Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	30 m MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500M MIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 253mm/minute.	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN
Terminal /Housing Retention Force	Pull the terminal at the speed rate of 25 3mm per minute	3.92N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute	Contact Resistance: 60 m MAX
Temperature Rise	Carrying rated current load. (UL 498)	Temperature Rise: 30 MAX
Vibration	DC 1mA energizing state; vibration along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes	Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX
Shock	DC 1mA energizing state; 490m/s2{50G} shock in 6 mutually perpendicular directions; 3 strokes each.	Appearance: No Damage Discontinuity: 1 ms MAX
Heat Resistance	Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours.	Appearance: No Damage Contact Resistance: 60 m MAX
Cold Resistance	Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours.	Appearance: No Damage Contact Resistance: 60 m MAX
Humidity	Mate applicable FPC/FFC; place in 402, 90-95% relative humidity air for 96 hours; then measure within 0.5 hours after returning to room temperature.	Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN
Temperature Cycling	Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes b) 852 30 minutes	Appearance: No Damage Contact Resistance: 60 m MAX
Salt Spray	Mate applicable FPC/FFC; 48 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water; then dry at room temperature.	Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX
SO2 Gas Resistance	Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX
NH3 Gas Resistance	Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Appearance: No Damage Contact Resistance: 60 m MAX
Solderability	Immerse 0.2 mm from the terminal tip into a 2455 tin bath for 20.5 sec.	Solder Wetting: 95% coverage
Resistance to Soldering Heat	305 sec. Soldering Temperature: 2455, at least 5 times in a 2455 hot air oven.	Appearance: No Damage, Deformation
5. PRODUCT SHAPE, DIMENSIONS AND MATERIALS
Main body	LCP UL 94V-0
Housing Lock	LCP UL 94V-0
Terminal Sit uip	Phosphor Bronze
Contact	Phosphor Bronze
Remark	Metal surface plated with tin