0.5mm Pitch Flexible Flat Cable Connector Hanxia HX0.5-14P CTXJ-H2.0 119 for Electronic Connections

Name: 0.5mm Pitch Flexible Flat Cable Connector Hanxia HX0.5-14P CTXJ-H2.0 119 for Electronic Connections
Brand: Hefei Purple Horn E-Commerce Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 0.5mm Pitch FPC/FFC Connectors manufactured by Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.

Product Attributes

Brand: Hanxia Electronic ()
Origin: Shenzhen, China
Certifications: UL 94V-0 (for LCP material)
Materials: Main body: LCP UL 94V-0; Housing Lock: LCP UL 94V-0; Terminal/Contact: Phosphor Bronze (plated with tin)

Technical Specifications

Item	Specification	Requirement
3. RATINGS
Rated Voltage (MAX)	AC/DC (Virtual value) 50Hz	50V
Rated Current (MAX)		0.4A
Ambient temperature Range		-25+85
4. PERFORMANCE
4.1 Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	30 m MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500MMIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions)	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN
Terminal /Housing Retention Force	Pull the terminal at the speed rate of 25 3mm per minute.	3.92N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.	Contact Resistance: 60 m MAX
Temperature Rise	Carrying rated current load. (UL 498)	30 MAX
Vibration	DC 1mA under energized state; vibrate along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes.	Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX.
Shock	DC 1mA under energized state; 6 directions perpendicular to the mating axis; 490m/s2{50G}; 3 strokes each.	Appearance: No Damage Discontinuity: 1 ms MAX.
Heat Resistance	Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours.	Appearance: No Damage Contact Resistance: 60 m MAX
Cold Resistance	Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours.	Appearance: No Damage Contact Resistance: 60 m MAX
Humidity	Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; then measure within 0.5 hours after returning to room temperature.	Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN
Temperature Cycling	Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature and humidity between cycles.	Appearance: No Damage Contact Resistance: 60 m MAX
Salt Spray	Mate applicable FPC/FFC; 24 4 hours exposure to a salt spray from the 51% solution at 352. Wash with room temperature water after test; then dry at room temperature.	Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX
SO2 Gas	Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX
NH3 Gas	Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Appearance: No Damage Contact Resistance: 60 m MAX
Solderability	Dip 0.2 mm from terminal tip into 2455 tin bath for 20.5 sec.	Solder Wetting: 95% coverage area
Resistance to Soldering Heat	Subjected to 305 sec in a 2455 hot air oven, at least 5 times.	Appearance: No Damage, Deformation