Precision engineered hanxia HX AM 90 YC USB connector rated DC 30V 1.5A for electronic connections

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Specification for Approval

This document outlines the specifications for the HX AM 90YC USB connector, designed for reliable performance within a specified temperature range and standard atmospheric conditions. It details mechanical, electrical, and durability characteristics to ensure product quality and adherence to industry standards.

Product Attributes

Brand: Hanxia Electronic Co., Ltd ()
Origin: Shenzhen, China
Color: 0.9 Gray
Model Type: 1U HX AM 90YC USB

Technical Specifications

Item	Test Conditions	Performance Specification
RATING
	PRACTICAL TEMPERATURE RANGE	-25~85C
	RATING ()	DC 30V 1.5A
STANDARD ATMOSPHEIC CONDITIONS
	Temperature	5C TO 35
	Humidity	45% TO 85%
	Pressure	86Kpa TO 106Kpa
MECHANICAL
1. CONNECTION FORCE	After connecting and disconnecting using standard plug gauge 3 times	3.57Kgf MAX
2. DISCONNECTION FORCE	After connecting and disconnecting using standard plug gauge 3 times	1.02Kgf MIN
3. TERMINAL STRENGTH	Static load of 0.1N/m (1kgf/cm) applied to the tip for 1 min in any direction	No damage, satisfies electrical and mechanical characteristics
ELECTRICAL
3.1 CONTACT RESISTANCE	Measured at small current (100mA or less), 1000Hz	30m MAX
3.2 INSULATION RESISTANCE	Apply 100V DC for 1 min (between body and conductor, between non-contacting conductors, between non-contacting conductors when plug is inserted)	1000M MIN
3.3 DIELECTRIC STRENGTH	AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA (between body and conductor, between non-contacting conductors, between non-contacting conductors when plug is inserted)	No damage, arcing or breakdown
DURABILITY
4.1 SOLDERABILITY TEST	Terminals dipped 1mm in solder bath at 2505 for 50.5 seconds	(1) Solder wetting time 3 sec (2) Soldering area > 75%
4.2 RESISTANCE TO SOLDERING HEAT TEST	Reflow soldering conditions: Preheat to 180, peak temperature 2605 within 20 seconds	No deformation of case or excessive looseness of terminals, satisfies electrical characteristics
4.2 RESISTANCE TO SOLDERING HEAT TEST	Soldering iron method: Bit temperature 3305, application time 30.5 seconds, no excessive pressure on terminals	No deformation of case or excessive looseness of terminals, satisfies electrical characteristics
4.3 HUMIDITY TEST	Stored at 402 and 90% to 96% humidity for 96 hr, then maintained at standard atmospheric conditions for 1 hr	-
4.4 HEAT TEST	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour	No damage on appearance, satisfies mechanical and electrical characteristics
4.5 COLD TEST	Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour	No damage on appearance, satisfies mechanical and electrical characteristics
4.6 LIFE TEST	With load: 5000 cycles at 10 to 20 cycles/min at rating condition (non-inductive load)	(1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Satisfies mechanical and electrical characteristics
4.6 LIFE TEST	Without load: 5000 cycles at 10 to 25 cycles/min with mating plugs and jacks	-
4.7 TEMPERATURE CYCLING TEST	5 cycles of specified temperature conditions, then 30 minutes in room ambient	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
4.8 COLD & HEAT SHOCK TEST	5 cycles of specified temperature conditions, then 30 minutes in room ambient	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).