electrical mechanical durability performance hanxia HX 10.0 QCHTJB6.3 product specification document

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the technical details and performance standards for the HX 10.0 QCHTJB6.3 product from Shenzhen Hanxia Electronic Co., Ltd. It covers electrical, mechanical, and durability characteristics, ensuring reliable performance within a specified operating temperature range.

Product Attributes

Brand: Hanxia
Origin: Shenzhen, China
Model: HX 10.0 QCHTJB6.3
Customer Approval Signatures: Huang Bin, Zhang Wei, Luo Xiaochun
Manufacturer: Shenzhen Hanxia Electronic Co., Ltd
Contact: Tel: 0755-33819206, Fax: 0755-27597491

Technical Specifications

Item		Test Conditions		Performance
RATING		DC 30V 1.5A
RATING		PRACTICAL TEMPERATURE RANGE: -25~85C
STANDARD ATMOSPHERIC CONDITIONS		(1) Temperature: 5 TO 35
		(2) Humidity: 45% TO 85%
		(3) Pressure: 86Kpa TO 106Kpa
MECHANICAL		CONNECTION FORCE	MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES	3.57Kgf MAX
MECHANICAL		DISCONNECTION FORCE	MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES	1.02Kgf MIN
TERMINAL STRENGTH		A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION		THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED
ELECTRICAL		CONTACT RESISTANCE	MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz	30m MAX
ELECTRICAL		INSULATION RESISTANCE	APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS	1000M MIN
DIELECTRIC STRENGTH		AC 500V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA		WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC
DURABILITY		SOLDERA- BILITY TEST	THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505 FOR 50.5 SECONDS	1SOLDER WETTING TIME SHALL BE 3 SEC OR LESS 2THE AREA OF SOLDERING SHOULD BE OVER 75%
DURABILITY		RESISTANCE TO SOLDERING HEAT TEST (REFLOW SOLDERING CONDITIONS)	PREHEAT:180.120, TALLEST TEMPERATURE:2605 WITHIN 20 SECONDS.	WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED
RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON METHOD)	BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON 30.5 SEC	WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED
HUMIDITY TEST		STORED AT 402 AND 90%TO 96% HUMIDITY FOR 96 Hr, THEN MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr		APPEARANCE AND CHARACTERISTICS SHALL BE SATISFIED
HEAT TEST		STORED AT 702 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 HOUR		APPEARANCE AND CHARACTERISTICS SHALL BE SATISFIED
COLD TEST		STORED AT -253 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 HOUR		APPEARANCE AND CHARACTERISTICS SHALL BE SATISFIED
LIFE TEST		WITH LOAD (NON-INDUCTIVE LOAD)	CONNECTION AND DISCONNECTION 5000 CYCLES AT 10 TO 20 CYCLES / MIN	1 CONTACT RESISTANCE SHALL BE 0.1 2 DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N 3 MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED
LIFE TEST		WITHOUT LOAD	CONNECTION AND DISCONNECTION 5000 CYCLES AT 10 TO 25 CYCLES/MIN
TEMPARATURE CYCLING TEST		5 CYCLES OF 70 (0.5 Hr) -> ROOM TEMP (0.5 Hr) -> -40 (1 Hr) -> ROOM TEMP (0.5 Hr)		THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 20N, CONTACT RESISTANCE:MAX.30M, INSULATION RESISTANCE: MIN.100 M, DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN
TEMPARATURE CYCLING TEST		FOLLOWED BY 30 MINUTES IN ROOM AMBIENT CONDITION
COLD&HEAT SHOCK TEST		5 CYCLES OF 70 (0.5 Hr) -> -20 (1 Hr) -> ROOM TEMP (0.5 Hr)		THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 25N, CONTACT RESISTANCE:MAX.30M, INSULATION RESISTANCE: MIN.100 M, DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN
COLD&HEAT SHOCK TEST		FOLLOWED BY 30 MINUTES IN ROOM AMBIENT CONDITION