Durable USB hanxia HX 10.0 HCHTJB6.3 with mechanical connection force tested and rated electrical performance DC 30V 1.5A

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the HX 10.0 HCHTJB6.3 USB product from Shenzhen Hanxia Electronic Co., Ltd. It details the product's technical performance, including electrical, mechanical, and durability characteristics, designed for operation within a specific temperature and atmospheric range.

Product Attributes

Brand: (Shenzhen Hanxia Electronic Co., Ltd)
Model: HX 10.0 HCHTJB6.3
Product Name: USB
Origin: Shenzhen, China

Technical Specifications

Item	Project	Test Conditions	Performance	Specification
RATING	Rated Value	DC 30V 1.5A
RATING	Operating Temperature Range	-25~85C
STANDARD ATMOSPHERIC CONDITIONS	Temperature	5C TO 35
	Humidity	45% TO 85%
	Pressure	86Kpa TO 106Kpa
MECHANICAL	Connection Force	After connecting and disconnecting using standard plug gauge 3 times	MAX	3.57Kgf
	Disconnection Force	After connecting and disconnecting using standard plug gauge 3 times	MIN	1.02Kgf
	Terminal Strength	Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction	No damage to terminal such as cracks, looseness or play; satisfy electrical and mechanical characteristics
ELECTRICAL	Contact Resistance	Measured at small current (100mA or less), 1000Hz	MAX	30m
	Insulation Resistance	Apply a voltage of 100V DC for 1 min to specified portions	MIN	1000M
	Dielectric Strength	AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA (between specified portions)	No insulation breakdown or arcing
DURABILITY	Solderability Test	Terminals dipped 1mm in solder bath of 2505 for 50.5 seconds	(1) Solder wetting time 3 sec (2) Soldering area > 75%
DURABILITY	Resistance to Soldering Heat Test (Reflow)	Preheat: 180, 120s; Peak temp: 2605 within 20s	No deformation of case or excessive looseness of terminals; satisfy electrical characteristics
	Resistance to Soldering Heat Test (Soldering Iron)	Bit temp 3305, application time 30.5 sec, no excessive pressure on terminals	No deformation of case or excessive looseness of terminals; satisfy electrical characteristics
	Humidity Test	Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr
	Heat Test	Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hr	No damage on appearance; satisfy mechanical and electrical characteristics
	Cold Test	Stored at -253 for 96 Hours, then subjected to controlled recovery for 1 Hr	No damage on appearance; satisfy mechanical and electrical characteristics
LIFE TEST	With Load (non-inductive)	5000 cycles of connection/disconnection at 10 to 20 cycles/min	(1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Satisfy mechanical and electrical characteristics
LIFE TEST	Without Load	5000 cycles of connection/disconnection with mating plugs/jacks at 10 to 25 cycles/min
TEMPERATURE CYCLING TEST		5 cycles of specified temperature conditions, then 30 min in room ambient	No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals)
COLD & HEAT SHOCK TEST		5 cycles of specified temperature conditions, then 30 min in room ambient	No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals)