Micro USB Connector Hanxia HX MICRO DNJ ZB Designed for Electrical Performance and Mechanical Strength

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the HX MICRO DNJ ZB, a Micro USB connector manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the material composition, mechanical, electrical, and environmental performance requirements to ensure product quality and reliability.

Product Attributes

Brand: HX
Origin: Shenzhen Hanxia Electronic Co., Ltd
Model: MICRO DNJ ZB
Certifications: EIA, MIL STD

Technical Specifications

(Test Item)	(Specification & Standard)	(Test Method & Reference Standard)
1 (Material Details)	1.1 (Plastic Part): LCP UL94V-0
	1.2 (Contact Terminal Part): C5191, (Nickel base), 1 (Contact area gold plated 1)
	1.3 (Shell Part): H65 EH, 60 (Shell nickel plated base 60)
2 (Working Conditions)	2.1 (Working Current): 1.8Ampere
	2.2 (Operating Temperature): -30+80
3 (Electrical Performance)	3.1 (Contact Resistance): 50m MAX	(Test contact resistance of product contact parts with low power current) : EIA 364-23A
	3.2 (Insulation Resistance): 100M MIN	(Test contact resistance of product contact parts with low power current) 100V DC : EIA 364-23A
	3.3 (Withstand Voltage Test): 300V AC 1 0.5mA MAX	1 (Test high voltage resistance between adjacent contact pins for 1 minute) : EIA 364-20A
4 (Mechanical Performance)	4.1 (Insertion Force): 3.0kgf MAX	25mm/ (Force when the cable end is inserted at a speed of 25mm/min when matched with the cable end) : EIA 364-13A
	4.2 (Extraction Force): 0.7~1.8 kgf	25mm/ (Force when the cable end is extracted at a speed of 25mm/min when matched with the cable end) : EIA 364-13A
	4.3 PIN (Terminal Single PIN Retention Force): 0.5 kgf MIN	PIN 25mm/ (Force to withdraw the contact pin from the plastic at a speed of 25mm/min)
	4.4 (Durability Test): 5000 (5000 cycles)	600 (Product plugged and unplugged at a uniform speed of 600 times per hour) : EIA 364-09A
	4.5 (Vibration Test)	10HZ 55HZ 10HZ X/Y/Z 2 1.5mm (Frequency from 10HZ to 55HZ and back to 10HZ per minute as one cycle, continuously tested for 2 hours in each of X/Y/Z directions. Amplitude is 1.5mm) : EIA 364-28A
5 (Environmental Performance)	5.1 (Solderability): 95% (Tin coverage over 95%)	2355 50.5 (Product soldering area immersed in a tin bath at 2355 for 50.5 seconds) : MIL STD-202F
	5.2 (High Temperature Resistance)	85 96 3 (Place the product in a high-temperature furnace at 85 for 96 hours, then place it at room temperature for 3 hours for observation.) : MIL STD-1344A
	5.3 (Low Temperature Resistance)	-40 96 3 (Place the product in a low-temperature furnace at -40 for 96 hours, then place it at room temperature for 3 hours for observation.) : MIL STD-1344A
	5.4 (Humidity Resistance)	402 9095RH 120 (Place the product in an environment with a temperature of 402 and humidity of 90-95RH for 120 hours, then observe.) : EIA 364-31A
	5.5 (Corrosion Resistance)	5% 352 12 1 (Place the product in a salt spray chamber with a salt water concentration of 5% and a temperature of 352 for continuous spraying for 12 hours, then observe the product after placing it at room temperature for 1 hour.) : EIA 364-26A
	5.6 (Solderability Resistance)	1 2 (1. No obvious discoloration or blistering on appearance; 2. Smooth tinning on solder pins)
		General Inspection Criteria: 1 (No obvious damage to product appearance) 23.0kgf MAX (Insertion Force: 3.0kgf MAX) 30.7~1.8 kgf (Extraction Force: 0.7~1.8 kgf) 4 100m MAX (Contact Resistance 100m MAX) 5 100M MIN (Insulation Resistance 100M MIN)