Durable USB product hanxia HX 10.0 QCHTJB6.8 rated DC 30V 1.5A suitable for temperature range minus 25 to 85 degrees
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification document outlines the requirements for the HX 10.0 QCHTJB6.8, a USB product from Shenzhen Hanxia Electronic Co., Ltd. It details the product's rating, operating conditions, and performance standards for mechanical, electrical, and durability testing.
Product Attributes
- Brand: Hanxia Electronic
- Origin: Shenzhen, China
- Model: HX 10.0 QCHTJB6.8
- Part No: QCHTJB6.8
- Customer Approval Signatures: Provided (specific names not detailed in output)
- Prepared By:
- Checked By:
- Approved By:
Technical Specifications
| Item | Project | Test Conditions | Performance | Specification |
| Rating | Rated Value | DC 30V 1.5A | ||
| Operating Temperature Range | -25~85C | Within -25C~+85C temperature | ||
| Standard Atmospheric Conditions | Temperature | 5C to 35 | ||
| Humidity | 45% to 85% | |||
| Pressure | 86Kpa to 106Kpa | |||
| Mechanical | Connection Force | After connecting and disconnecting using standard plug gauge 3 times | Measurement shall be made | 3.57Kgf MAX |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | Measurement shall be made | 1.02Kgf MIN | |
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction | No damage to terminal such as cracks, looseness or play; electrical and mechanical characteristics shall be satisfied | ||
| Electrical | Contact Resistance | Measured at small current (100mA or less) at 1000Hz | 30m MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions | 1000M MIN | ||
| Dielectric Strength | AC 500V ims (50~60Hz) for 1 min, trip current: 0.5mA, applied to specified portions | Without damage to parts, arcing or breakdown etc. | ||
| Durability | Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | (1) Solder wetting time shall be 3 seconds or less (2) The area of soldering should be over 75% | |
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: 180, 120s; Peak temperature: 2605 within 20 seconds | No deformation of case or excessive looseness of terminals; electrical characteristics shall be satisfied | ||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 seconds, no excessive pressure on terminal | No deformation of case or excessive looseness of terminals; electrical characteristics shall be satisfied | ||
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | |||
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; mechanical and electrical characteristics shall be satisfied | ||
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; mechanical and electrical characteristics shall be satisfied | ||
| Life Test | With Load (Non-inductive Load) | 5000 cycles at a speed of 10 to 20 cycles/min | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Mechanical and Electrical Characteristics shall be satisfied | |
| Without Load | 5000 cycles at a speed of 10 to 25 cycles/min | |||
| Temperature Cycling Test | 5 cycles of specified conditions (e.g., 70 for 0.5 hours, -20 for 0.5 hours) | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals) | ||
| Cold & Heat Shock Test | 5 cycles of specified conditions (e.g., 70 for 1 hour, -20 for 1 hour) | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina