Micro USB hanxia HX 10.0 4JCHT6.3 product specification with temperature humidity and pressure tolerance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Approval Specification

This document outlines the specifications and approval requirements for the Micro USB HX 10.0 4JCHT6.3 product manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the product's technical performance, including electrical, mechanical, and durability characteristics, to ensure it meets standard operating conditions and customer requirements.

Product Attributes

Brand: Hanxia
Origin: Shenzhen Hanxia Electronic Co., Ltd
Model: HX 10.0 4JCHT6.3
Project: Micro USB

Technical Specifications

Item	Project	Test Conditions	Performance	Specification
RATING	Rated Value	DC 30V 1.5A
RATING	Operating Temperature Range	-25~85C	Within -25C~+85C
STANDARD ATMOSPHERIC CONDITIONS	Temperature		5 to 35
	Humidity		45% to 85%
	Pressure		86Kpa to 106Kpa
MECHANICAL	Connection Force	After 3 cycles using standard plug gauge		1.02Kgf MIN
MECHANICAL	Terminal Strength	0.1N/m (1kgf/cm) for 1 min in any direction	No damage, cracks, looseness, or play. Satisfy mechanical and electrical characteristics.
ELECTRICAL	Contact Resistance	Measured at small current (100mA or less), 1000Hz		30m MAX
	Insulation Resistance	DC 500V 1 min applied to specified portions		1000M MIN
	Dielectric Strength	AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA	No damage, arcing, or breakdown.
DURABILITY	Solderability Test	Terminals dipped 1mm in solder bath at 2505 for 50.5 seconds	Solder wetting time 3 sec; Soldering area > 75%
	Resistance to Soldering Heat Test (Reflow)	Preheat: 180, 120s; Peak temp: 2605 within 20s	No deformation of case or excessive looseness of terminals. Satisfy mechanical and electrical characteristics.
	Resistance to Soldering Heat Test (Soldering Iron)	Bit temp 3305, application time 30.5 sec	No deformation of case or excessive looseness of terminals. Satisfy mechanical and electrical characteristics.
	Humidity Test	Stored at 402, 90%-96% humidity for 96 Hr, then 1 Hr at standard conditions	No damage on appearance. Satisfy mechanical and electrical characteristics.
HEAT TEST		Stored at 702 for 96 Hours, then 1 Hr recovery	No damage on appearance. Satisfy mechanical and electrical characteristics.
COLD TEST		Stored at -253 for 96 Hours, then 1 Hr recovery	No damage on appearance. Satisfy mechanical and electrical characteristics.
LIFE TEST	With Load (Non-inductive)	5000 cycles at 10 to 20 cycles/min	Contact resistance 0.1; Disconnection force 0.8 to 2.0N; Satisfy mechanical and electrical characteristics.
	Without Load	5000 cycles at 10 to 25 cycles/min
	Temperature Cycling Test	5 cycles of specified conditions (70 for 0.5 Hr, -20 for 0.5 Hr)	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min.
COLD & HEAT SHOCK TEST		5 cycles of specified conditions (70 for 1 Hr, -20 for 1 Hr)	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min.