Connector 6.20mm Pitch Double Row Electrical Connector HCTL HC VL 2S 05 Suitable for AWG 12 22 Wire
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 6.20mm pitch VL connector, double row type, designed for various electrical applications. It details product performance, test methods, and inspection requirements.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-0 (for Housing Plastic)
Technical Specifications
| Section | Item | Description/Requirement | Test Mode |
| 3. USE CONDITION | Ambient temperature Range | -40 105 | |
| 3. USE CONDITION | Applicable Wire Sizes | AWG #1222 | |
| 3. USE CONDITION | Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxidation, or peeling. | |
| 4. Appearance and Dimension | Dimension | According to drawings | |
| 4. Appearance and Dimension | Exchangeable | Exchangeable with same specification products. | |
| 5. Material | Terminal Contact () | Phosphor bronze, 0.25mm thick, Tin plating | |
| 5. Material | Housing Plastic () | Nylon66, UL94V-0(2), Color: Nature | |
| 6. Electrical Performance | Rated Current | 20A AC/DC | |
| 6. Electrical Performance | Rated Voltage | 600V AC/DC | |
| 6. Electrical Performance | Contact Resistance | Initial value 20m | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 6. Electrical Performance | Insulation Resistance | 1000 M | Apply 2000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| 6. Electrical Performance | Withstand voltage | No breakdown or flashover | A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector (Does not include wire resistance) |
| 7. Mechanical Performance | Single contact insertion force | 20N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| 7. Mechanical Performance | Single contact Withdrawal force | 4N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm withdrawing force test |
| 7. Mechanical Performance | Terminal crimping Wire strength | 50N (AWG#12) | Terminal crimping wire axial per minute to 253mm rate of the pullout force |
| 7. Mechanical Performance | Seat pull-out force | 30N | Exerts a force on the pin end at a rate per minute 253mm until the needle exit Seat pull-out force |
| 7. Mechanical Performance | Pin Retention Force | 30N (AWG#12) | |
| 7. Mechanical Performance | Vibration | Current Discontinuity: Max 1 sec; Contact Resistance: 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/minute; Period: 2 hours for each direction (X, Y, Z axis) |
| 7. Mechanical Performance | Durability | Contact Resistance: 40m; Appearance: No damage | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| 8. Endurance Characteristics | Thermal Aging | Contact Resistance: 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature rise | (Value not specified) | Mate connector measure the temperature rise of contact when the maximum rated current is passed |
| 8. Endurance Characteristics | Constant Humidity | Contact Resistance: 40m; Insulation Resistance: 1000 M; Appearance: No damage | Temperature: 402 C; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature cycling | Contact Resistance: 40m; Insulation Resistance: 1000 M; Withstand voltage: No breakdown or flashover; Appearance: No damage | One cycle: -403C 30min, room temp 10-15min; 1053C 30min, room temp 10-15min; Total cycle: 5 cycles |
| 8. Endurance Characteristics | Salt spray | Contact Resistance: 40m; Appearance: No damage | Temperature: 353 C; Concentration: 51%; Period: 24 hours (Stamping before tin plated) or 8 hours (Stamping after tin plated) |
| 8. Endurance Characteristics | Solder ability | Area of soldering: 90%; Appearance: No damage | Solder temperature: 2603C; Immersion period: 3 0.5S |
| 8. Endurance Characteristics | Wave soldering tin soldering process | Appearance: No damage | Soldering temperature: 2603; Soldering time: 30.5S |
| 8. Endurance Characteristics | Manual soldering tin process | Appearance: No damage | Soldering pot: 3505; Soldering time: 30.5S |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina