electrical connector HCTL HC-XG-2*17Y-05 featuring double row 2.54mm pitch design and gold plated terminal finish
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 2.54mm pitch XG connector double row type, including product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: ROHS
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxides and not peeled. | General Principles |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature Range | -40 +105 | |
| Applicable Wire Sizes | AWG #2226 | |
| Applicable PC board thickness | 1.6mm | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze, Brass | Material: Phosphor bronze thickness 0.22mm, Brass thickness 0.64mm. Finish: Half the gold plated 2u/3u |
| Housing Plastic | PBT UL94V-0 | Color: Black, White |
| Contact | Plastic Wafer | Type: Straight Pin (A), Bent Pin (AW) |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute between adjacent contacts |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts |
| 7. Mechanical Performance | ||
| Single contact insertion force | 3.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a react per minute to 253mm along the write direction, are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | 10N (AWG#22) / 20N (AWG#26) | Axial per minute to 25 3mm rate of the pullout force |
| Pin Retention Force | 50N (AWG#22) / 30N (AWG#24) / 20N (AWG#26) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Vibration | Current interruption: 1 sec Max | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000M, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature cycling | No breakdown or flashover | One cycle consists of -403C 30min, room temp 10-15min, 1053C 30min, room temp 10-15min. Total cycle: 5 cycles |
| Salt spray | Contact Resistance 40m, Appearance: No damage | Temperature: 353C, Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90 % | Solder temperature: 2455C, Immersion period: 30.5S |
| Resistance to soldering heat | Appearance: No damage | Wave soldering: Soldering temperature: 2605C, Soldering time: 50.5S. Manual soldering: Soldering temperature: 3505C, Soldering time: 30.5S. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina