Double Row Connector 2.54mm Pitch HCTL HC-XG-2*20Y-05 with Durable Materials and Exchangeable Design

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 2.54MM PITCH XG CONNECTOR DOUBLE ROW TYPE, including product performance, test methods, and inspection requirements. It is designed for use in various electronic applications, offering reliable connectivity and durability.

Product Attributes

Brand: HCTLDZ ()
Origin: Shenzhen, China
Materials: PBT, Phosphor Bronze, Brass
Certifications: ROHS, UL94V-O

Technical Specifications

Item	Requirement	Test Mode
3. Use Condition
Ambient temperature Range	-40 105
Applicable Wire Sizes	AWG #2226
Applicable PC board thickness	1.6mm
4. Appearance and Dimension
Appearance	Product surface without defect, dirt, crack, and mechanical damage; Contact without rust, plating oxidation, peeling.
Dimension	According to drawings
Exchangeable	Exchangeable with same specification products.
5. Material
Terminal Contact	Phosphor bronze, Brass. Thickness 0.22mm / 0.64mm. Partial gold plating: 2m / 3m. ROHS compliant.
Housing Plastic Wafer	PBT UL94V-O. Color: Black / White.
6. Electrical Performance
Rated Voltage	250V AC/DC
Rated Current	3A AC/DC
Withstand voltage	No breakdown or flashover. Apply 500V AC(rms) for 1 minute between adjacent contacts.
Contact Resistance	Initial value 20m. Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector. Does not include wire resistance.
Insulation Resistance	1000 M. Apply 500V DC(rms) for 1 minute between adjacent contacts.
7. Mechanical Performance
Single contact insertion force	3.5N	Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test.
Single contact Withdrawal force	0.39N	The terminal and the hole seat at a rate per minute to 25 3mm along the write direction are pulled out from the hole in the seat.
Terminal crimping Wire strength	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N	Axial pullout force at a rate per minute to 25 3mm.
Pin Retention Force	10N	Exerts a force on the pin end at a rate per minute 253mm until the needle exit.
Durability	Contact Resistance 40m. Appearance: No damage.	Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute.
Vibration	Current Discontinuity: 1 sec Max. Contact Resistance 40m. Appearance: No damage.	Amplitude: 1.5mm p-p. Frequency: 10-55-10 Hz/minute. Duration: 2 hours for each direction (X, Y, Z axis).
8. Endurance Characteristics
Thermal Aging	Contact Resistance 40m. Appearance: No damage.	Temperature: 852. Period: 96 hours continuously.
Temperature Rise	Measure temperature rise of contact when the maximum rated current is passed.
Humidity (Constant Humidity)	Contact Resistance 40m. Insulation Resistance 1000m. Appearance: No damage.	Temperature: 402 C. Relative humidity: 90-95% (RH). Period: 96 hours continuously.
Temperature cycling	Contact Resistance 40m. Insulation Resistance 1000m. Withstand voltage: No breakdown or flashover. Appearance: No damage.	One cycle: -403C (30min) -> room temp (10-15min) -> 1053C (30min) -> room temp (10-15min). Total cycles: 5.
Salt spray	Contact Resistance 40m. Appearance: No damage.	Temperature: 35 3 C. Concentration: 5 1 %. Period: 24H.
Solder ability	Solder area: 90%.	Solder temperature: 2455C. Immersion period: 3 0.5S.
Resistance to soldering heat (Wave soldering)	Appearance: No damage.	Soldering temperature: 2605. Soldering time: 50.5S.
Resistance to soldering heat (Manual soldering)	Appearance: No damage.	Soldering temperature: 3505. Soldering time: 30.5S.