electrical connection HCTL PH-6A strip connector designed for temperature range minus 25 to 85 Celsius

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to the PH series strip connector, covering product performance, test methods, and inspection requirements. It is designed for electrical connections with specific environmental and mechanical performance standards.

Product Attributes

Brand: HCTLDZ
Origin: Shenzhen, China
Product Name: PH 2.0 Series Connector
Model Number: HC-PH - ****
Release Date: 2019/7/25
Revision: A

Technical Specifications

Item	Description	Requirement
Scope	Contents of specifications apply to PH series connector strip	Product performance, test methods and inspection requirements
	Applicable Standards	GB/T2421, GB/T2423, GB/T2424, GB/T5095
	Use Condition - Ambient Temperature	-25 +85
	Use Condition - Applicable Wire Sizes	AWG #2228
Material	Terminal Contact	Phosphor bronze, 0.2mm thick, Tin plating: 35m
	Housing Plastic	Nylon66 UL94V-0, Color: White
	Wafer	Brass, 0.50mm thick, Tin plating: 2.55m, Color: Beige
Electrical Performance	Rated Voltage	250V AC/DC
	Rated Current	2A AC/DC
	Withstand Voltage	800V AC (rms) for 1 minute between adjacent contacts, leakage current	No breakdown or flashover
	Insulation Resistance	1000 M
Mechanical Performance	Single contact insertion force	6N	Test rate: 253mm/min
	Single contact Withdrawal force	0.5N	Test rate: 253mm/min
	Terminal crimping Wire strength	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Test rate: 253mm/min
	Pin Retention Force	15N	Test rate: 253mm/min
	Seat pull-out force	15N	Test rate: 253mm/min
	Durability	Contact Resistance 30m	30 cycles, 10 cycles/min max rate
	Vibration	Current Discontinuity: 1 sec Max, Contact Resistance 30m	Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/min, 2 hours per direction (X, Y, Z)
Environmental Performance	Thermal Aging	Contact Resistance 30m, Appearance: No damage	852, 96 hours
	Temperature Cycling	Appearance: No damage, No breakdown or flashover	-553 (30min) to 853 (30min), 5 cycles
	Constant Humidity	Contact Resistance 30m, Insulation Resistance 500m, Appearance: No damage	402, 90-95% RH, 96 hours
	Salt Spray	Contact Resistance 30m, Appearance: No damage	353, 51% NaCl solution, 8 hours (pre-plated) or 24 hours (post-stamped)
Soldering Performance	Solder ability	Soldering Area 90%	2455C, 30.5S (tin pot)
Soldering Performance	Resistance to soldering heat	Appearance: No damage	Hand soldering: 3505C, 30.5S; Wave soldering: 2305C, 50.5S