Double Row 2.50mm Pitch Electrical Connector Strip HCTL HC XH 4Y L 05 for Industrial Applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 2.50 series of strip connectors, detailing product performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for various applications requiring a 2.50mm pitch, double-row configuration.
Product Attributes
- Brand: HCT ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Nylon66 material)
- Color: White (for housing)
Technical Specifications
| Item | Requirement | Test Mode |
| 1. Scope | ||
| The contents of specifications for 2.50 series connector strip including product performance, test methods and inspection requirements. | ||
| 2. Applicable Standards | ||
| GB/T2421 | Electrical Connectors Environmental Testing - Part 1: General Principles | |
| GB/T2423 | Electrical Connectors Environmental Testing Methods | |
| GB/T2424 | Electrical Connectors Environmental Testing Guidelines | |
| GB/T5095 | Basic Test Rules and Measuring Methods for Electromechanical Components of Electronic Equipment | |
| 3. Use Condition | ||
| Ambient Temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Housing Plastic Wafer-A | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer-AW | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer-AWD | Nylon66 UL94V-O, Color: White | |
| Contact Pin | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Contact Pin | Phosphor bronze, Thickness 0.2mm, Tin plating: 24 m | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand Voltage | No breakdown or flashover | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 5.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 1.5N | Terminal and hole seat combination, pulled out from the hole seat at a rate of 253mm per minute along the wire direction. |
| Terminal crimping Wire strength | 10N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity |
| Pin Retention Force | 20N (AWG#22 wire) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force |
| Pin Retention Force | 13N (AWG#28 wire) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity Max 1 sec, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000 M, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature Cycling | Contact Resistance 40m, Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle consists of -553C 30min, 853C 30min, room temp 10-15min transition time. Total cycle: 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90 % | Soldering temperature: 2455C, Immersion period: 3 0.5S |
| Manual Soldering | Appearance: No damage | Soldering time: 30.5S, Soldering pot: 3505 |
| Wave Soldering | Appearance: No damage | Soldering time: 50.5S, Soldering pot: 260 5 C |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina