2 millimeter pitch double row PHB connector insulation resistance 1000 megaohms HCTL HC-PHB-2*7EY-05

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It covers product performance, test methods, and inspection requirements for this series of connectors.

Product Attributes

Brand: (HCTLDZ)
Origin: Shenzhen, China
Certifications: UL94V-O (for Housing Plastic)
Color: Nature (for Housing Plastic and Plastic Wafer)

Technical Specifications

Item	Requirement	Test Mode
Electrical Performance	Rated Voltage: 250V AC/DC
	Rated Current: 2A AC/DC
	Withstand Voltage: No breakdown or flashover	Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance
	Contact Resistance: 20m (Initial value)	A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. Does not include wire resistance.
	Insulation Resistance: 1000 M	Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors.
	Electrical Performance (Continued)
	Contact Resistance: 40m (after Durability, Thermal Aging, Temperature Rise, Humidity, Thermal Shock, Salt Spray, Soldering Heat tests)
Mechanical Performance	Terminal crimping Wire strength: 50N (AWG#22), 30N (AWG#24), 20N (AWG#26), 13N (AWG#28)	Axial pullout force per contact at a rate of 25 3mm per minute
	Single contact Withdrawal force: 12N	The terminal and the hole seat at a rate per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity.
	Fixed terminals And hole seat: 12N
	Single contact insertion force: 5N	The housing together with the terminal ends with wafer matched at a rate per minute to 25 3mm inserting force test.
	Seat pull-out force: 15N	Exerts a force on the pin end at a rate per minute 253mm until the needle exit Seat pull-out force.
	Pin Retention Force:
	Durability: 30 cycles	Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. Contact Resistance 40m.
	Vibration	Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Duration: 2 hours for each direction (X, Y, Z axes). Current discontinuity 1 sec. Contact Resistance 40m.	Mate connector combination state of the welding circuit board as test samples, resistance to vibration test.
	Mechanical Performance (Continued)
Environmental Performance	Thermal Aging: Appearance: No damage, Contact Resistance 40m	Connector combination condition is placed in the accordance with the following specifications high temperature aging test after the test and measurement of contact resistance. Temperature: 852, Period: 96 hours continuously.
	Temperature Rise: Measure contact temperature rise when maximum rated current is passed.
	Humidity (Constant Humidity): Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m	Connector combination under the condition of constant temperature of the following specifications constant temperature and humidity test after the experiment measuring contact resistance insulation resistance and withstand voltage test. Relative humidity: 90-95% (RH), Period: 96 hours continuously. Temperature: 402 C.
	Thermal Shock: Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m, Withstand Voltage: No breakdown or flashover	One cycle consists of -553C 30min, room temp 10-15min. Total cycle: 5 cycles. 853C 30min, room temp 10-15min.
	Salt Spray: Appearance: No damage, Contact Resistance 40m	Temperature: 353C, Concentration: 51%, Period: Stamping before tin plated for 24 hours, Stamping after tin plated for 8 hours.
	Solder Ability: Soldering area: 90%	Solder temperature: 2455C, Immersion period: 3 0.5S.
Soldering Heat Resistance	Manual Soldering: Resistance 40m	Soldering time: 30.5S, Soldering pot: 350 5C. Position DIP type needle solder conductor or a fixed piece at the end of the 1.5mm distance.
Soldering Heat Resistance	Wave Soldering: Resistance 40m	Soldering time: 50.5S, Soldering pot: 260 5C.