Electrical Connector HCTL HC-XH-3Y-L-05 with UL94V-O Nylon66 Housing and Tin Plated Brass Terminals
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 2.50mm pitch XH connector, double row type. It details product performance, test methods, and inspection requirements, suitable for various applications requiring reliable electrical connections.
Product Attributes
- Brand: HCT ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Nylon66 material)
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature Range | -25 85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 5. Material | ||
| Terminal | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Housing | Nylon66 UL94V-O, Color: White | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A | |
| Withstand voltage | No breakdown or flashover | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 5.5N | Mate connectors at a rate of 253mm per minute |
| Single contact Withdrawal force | 1.5N | Mate connectors at a rate of 253mm per minute |
| Terminal crimping Wire strength | 10N | Axial pullout force at 253mm per minute for AWG#22 wire |
| Pin Retention Force | 20N (AWG#22 wire) | Exerts a force on the pin end at a rate of 253mm per minute until the needle exits the seat |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity: Max 1 sec, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Measure contact temperature rise when maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature Cycling | Contact Resistance 40m, Insulation Resistance 1000m, No breakdown or flashover | One cycle: -553C for 30min, 853C for 30min, with 10-15min transition time. Total 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Concentration: 51%, Period: 24H |
| Solder ability | Area of soldering: 90 % | Solder temperature: 2455C, Immersion period: 3 0.5S |
| Manual soldering tin process | Appearance: No damage | Soldering time: 30.5S, Soldering pot: 3505 |
| Wave soldering tin soldering process | Appearance: No damage | Soldering time: 50.5S, Soldering pot: 260 5 C |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina