electrical connector strip HCTL HC-PHB-2*18EY-05 2.00mm pitch double row type for pcb applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE

This specification covers the 2.00 series connector strip, detailing product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections with specific environmental and mechanical tolerances.

Product Attributes

Brand: (HCTLDZ)
Origin: China
Certifications: UL94V-O

Technical Specifications

Item	Requirement	Test Mode
Scope	This specification applies to the 2.00 series connector strip, including product performance, test methods, and inspection requirements.
	Product surface should be free of defects, dirt, cracks, and mechanical damage. Contact parts should be free of rust, plating oxidation, and peeling.
	Applicable wire sizes: AWG #2228
	Applicable PC board thickness: 1.6mm
Use Condition	Ambient temperature: -25 +85
	Applicable wire sizes: AWG #2228
	Applicable PC board thickness: 1.6mm
Appearance and Dimension	Appearance: Product surface without defect, dirt, crack, and mechanical damage. Contact parts without rust, plating oxidation, and peeling.
	Dimension: According to drawings
	Exchangeable: Exchangeable with same specification products.
Material	Terminal Contact: Brass, Thickness 0.50mm, Tin plating: 2.55 m
	Housing Plastic: Nylon66 UL94V-O, Color: Nature
	Plastic Wafer: Nylon66 UL94V-O, Color: Nature
	Contact Pin: Phosphor bronze, Thickness 0.2mm, Tin plating: 35 m
Electrical Performance	Rated Voltage: 250V AC/DC
	Rated Current: 2A AC/DC
	Withstand voltage: No breakdown or flashover	Apply 800V AC(rms)for 1 minute between adjacent contacts to measure the insulation resistance
	Contact Resistance: Initial value 20m	Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector
Mechanical Performance	Terminal crimping wire pullout force: AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Axial pullout force at a rate of 25 3mm per minute
	Single contact withdrawal force: 0.3N	Axial pullout force at a rate of 25 3mm per minute
	Fixed terminals and hole seat force: 12N	Pullout force at a rate of 25 3mm per minute along the wire direction
	Seat pull-out force: 15N	Force applied to the pin end at a rate of 253mm per minute until the needle exits the seat
Durability	Durability: 30 cycles	Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. Contact Resistance 40m
Durability	Vibration: Amplitude 1.5mm p-p, Frequency 10-55-10Hz/minute, Period 2 hours for each direction (X, Y, Z)	Mate connector on welded circuit board, test for discontinuous current. Contact Resistance 40m
Environmental Characteristics	Thermal Aging: Temperature: 852, Period: 96 hours	Connector in oven, measure contact resistance after test. Appearance: No damage. Contact Resistance 40m
	Temperature Rise: Measure contact temperature rise when maximum rated current is passed.
	Humidity: Relative humidity: 90-95% (RH), Period: 96 hours	Connector in constant temperature and humidity chamber, measure contact resistance, insulation resistance, and withstand voltage after test. Appearance: No damage. Contact Resistance 40m, Insulation Resistance 1000m
Temperature Cycling	One cycle: -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycles: 5	Connector subjected to thermal shock. Measure contact resistance, insulation resistance, and withstand voltage after test. Appearance: No damage. Contact Resistance 40m, Insulation Resistance 1000m
Temperature Cycling	Temperature: 402 C	Same as paragraph 8.3
Salt Spray	Temperature: 353, Concentration: 51%	Connector subjected to salt spray test. Clean with water and dry naturally. Measure contact resistance. Appearance: No damage. Contact Resistance 40m
Solder Ability	Solder temperature: 2455C, Immersion period: 3 0.5S	Placed in tin soldering test. Soldering area: 90%. Stamping after tin plated for 8 hours or Stamping before tin plated for 24 hours.
Resistance to Soldering Heat	Manual Soldering: Soldering temperature: 350 5 , Soldering time: 3 0.5S. Wave Soldering: Soldering temperature: 260 5 C, Soldering time: 5 0.5S	DIP type needle solder position, 1.5mm distance from conductor or fixed piece.