Durable electrical connector HCTL HC-ZH-4Y-05 double row 1.50 series suitable for AWG 26 to 32 wire sizes
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification document outlines the requirements for the 1.50 series ZH connector, a double-row type connector designed for various electrical applications. It details product performance, testing methods, and inspection requirements, ensuring interchangeability and reliability.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Nylon and LCP materials)
- Color: Nature (for Housing and Wafer), White (for Nylon66 Wafer)
Technical Specifications
| Section | Item | Requirement | Test Mode |
| 3. USE CONDITION | Ambient temperature | -25 85 | |
| 3. USE CONDITION | Applicable Wire Sizes | AWG #2632 | |
| 3. USE CONDITION | Applicable PC board thickness | 0.6l.2mm | |
| 4. Appearance and Dimension | Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| 4. Appearance and Dimension | Dimension | According to drawings | |
| 4. Appearance and Dimension | Exchangeable | Exchangeable with same specification products. | |
| 5. Material | Terminal Contact (P/N: HC-ZH - ****) | Brass (0.50mm thick), Tin plating: 24 m OR Phosphor bronze (0.2mm thick), Tin plating: 24 m | |
| 5. Material | Housing Plastic (P/N: HC-ZH - ****) | Nylon UL94V-O(2), Color: Nature | |
| 5. Material | Wafer (P/N: HC-ZH - ****) | Nylon UL94V-O(2), Color: Nature OR LCP UL94V-O, Color: Nature | |
| 6. Electrical Performance | Rated Voltage | 50V AC/DC | |
| 6. Electrical Performance | Rated Current | 1A AC/DC | |
| 6. Electrical Performance | Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute between adjacent contacts |
| 6. Electrical Performance | Contact Resistance | Initial value 20m (Does not include wire resistance) | Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector |
| 6. Electrical Performance | Insulation Resistance | 500 M | Apply 500V DC(rms) for 1 minute between adjacent contacts |
| 7. Mechanical Performance | Terminal crimping Wire strength | 20N (AWG#26), 8N (AWG#28), 6N (AWG#30), 0.5N (AWG#32) | Axial pullout force at 253mm/min |
| 7. Mechanical Performance | Single contact Withdrawal force | 10N | Mate connector ends pulled out at 253mm/min |
| 7. Mechanical Performance | Single contact insertion force | 3N | Mate connector ends inserted at 253mm/min |
| 7. Mechanical Performance | Pin Retention Force | 13N | Force applied to pin end until needle exits seat at 253mm/min |
| 7. Mechanical Performance | Durability | Contact Resistance 40m; Appearance: No damage | Mate connector up to 30 cycles at 10 cycles/min before environmental test |
| 7. Mechanical Performance | Vibration | Current Interruption: Max 1 sec; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/min; Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature Rise | Measure temperature rise of contact when maximum rated current is passed | |
| 8. Endurance Characteristics | Humidity | Contact Resistance 40m; Insulation Resistance 500m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95%; Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature Cycling | Contact Resistance 40m; Withstand voltage: No breakdown or flashover; Appearance: No damage | One cycle: -553 (30min) room temp (10-15min) 853 (30min) room temp (10-15min); Total cycle: 5 cycles |
| 8. Endurance Characteristics | Solder ability | Solder area: 90 % | Solder temperature: 2455; Immersion period: 30.5S |
| 8. Endurance Characteristics | Salt spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Solution: 51% NaCl; Period: Stamping after tin plated for 8 hours OR Stamping before tin plated for 48 hours |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina