electrical strip connector HCTL HC-SHD-2*15Y-05 suitable for AWG 28 32 wire sizes and PC board thickness
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to the 1.0 series strip connector, encompassing product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections within specified environmental conditions.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: ROHS
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature Range | -25 85 | |
| Applicable Wire Sizes | AWG #2832 | |
| Applicable PC board thickness | 0.6l.2mm | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze, Tin plating: 35 m, Thickness: 0.20mm | |
| Housing Plastic | Nylon66 UL94V-O, Color: White | |
| Wafer (Vertical mount) | LCP UL94V-O, Color: Nature, Phosphor bronze, Tin plating: 35 m, Thickness: 0.20mm | |
| Wafer (Horizontal mount) | LCP UL94V-O, Color: Nature, Phosphor bronze, Tin plating: 35 m, Thickness: 0.20mm | |
| 6. Electrical Performance | ||
| Rated Voltage | 50V AC/DC | |
| Rated Current | 1A AC/DC | |
| Withstand voltage | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. No breakdown or flashover. | |
| Contact Resistance | Initial value 20m. Does not include wire resistance. | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. |
| Insulation Resistance | 100 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| 7. Mechanical Performance | ||
| Single contact Withdrawal force | 0.3N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity. |
| Terminal crimping Wire strength | 3N (AWG#28), 8N (AWG#30), 6N (AWG#32) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force. |
| Pin Retention Force | 13N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Fixed terminals And hole seat | 5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Single contact insertion force | 3N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Durability | Contact Resistance 20m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Vibration | Current Discontinuity: Max 1 sec. Contact Resistance 20m . Appearance: No damage. | Amplitude: 1.5mm p-p. Direction: X, Y, Z axis. Frequency: 10-55-10 Hz/minute. Period: 2 hours for each direction. |
| 8. Endurance Characteristics | ||
| Thermal Aging | Appearance: No damage. Contact Resistance 20m | Temperature: 852. Period: 96 hours continuously. |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed. | |
| Constant Humidity | Appearance: No damage. Contact Resistance 20m . Insulation Resistance 20m . | Relative humidity: 90-95% (RH). Period: 96 hours continuously. Temperature: 402 C. |
| Temperature cycling | No breakdown or flashover. | One cycle consists of -553C 30min, room temp 10-15min, 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Salt spray | Appearance: No damage. Contact Resistance 20m | Temperature: 353 C. Concentration: 51 % NaCl solution. Period: Stamping before tin plated for 48 hours; Stamping after tin plated for 8 hours. |
| Solder ability | Area of soldering: 90 % | Solder temperature: 2455C. Immersion period: 3 0.5S. |
| Resistance to soldering heat | Appearance: No damage. | Soldering time: 30.5S. Soldering pot: 3505. Position: SMT type needle solder, 0.5mm distance from conductor or fixed piece end. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina