Double Row 2.50mm Pitch Connector HCTL HC XHB 4Y 05 Tested for Mechanical Damage and Surface Defects

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 2.50mm pitch XHB connector, double row type. It details product performance, test methods, and inspection requirements for electrical connectors, designed for various applications.

Product Attributes

Brand: HCTLDZ ()
Origin: Shenzhen, China
Material: Brass, LCP, Nylon66, Phosphor bronze
Color: White, Nature (Brass)
Certifications: UL94V-0

Technical Specifications

Category	Item	Specification	Test Method
General Principles	Scope	This specification content is applicable to 2.50 series strip connectors, including product performance, test methods and test requirements.	-
	Applicable Standards	GB/T2421, GB/T2423, GB/T2424, GB/T5095	-
	Appearance	Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, not oxides and not peeled.	-
	Exchangeable	Exchangeable with same specification products.	-
Use Condition	Ambient Temperature	-40 +105	-
	Applicable Wire Sizes	AWG #2228	-
	Applicable PC board thickness	1.6mm	-
Material	Terminal Contact	Brass, Thickness 0.64mm, Tin plating: 2.55 m	-
	Housing Plastic Wafer	LCP UL94V-0, Color: White	-
	Contact Pin	Brass, Thickness 0.64mm, Tin plating: 2.55 m, Color: Nature	-
	Housing Plastic Wafer (Right Angle/Horizontal)	Nylon66 UL94V-O, Color: White	-
	Housing Plastic Wafer (Right Angle/Vertical)	Nylon66 UL94V-O, Color: White	-
Electrical Performance	Rated Voltage	250V AC/DC	-
	Rated Current	3A AC/DC	-
	Withstand Voltage	Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors	-
	Insulation Resistance	More than 1000 M	Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance
Mechanical Performance	Terminal crimping Wire strength	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Axial pullout force at a rate of 25 3mm per minute
	Terminal and hole seat fixed force	10N	Pullout force test at a rate of 25 3mm per minute
	Single contact insertion force	5.5N	Inserting force test at a rate of 25 3mm per minute
	Seat pull-out force	20N	Pullout force test until the needle exits at a rate of 253mm per minute
	Durability	Contact Resistance 40m , Appearance: No damage	Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test
Environmental Performance	Thermal Aging	Contact Resistance 40m , Appearance: No damage	Temperature: 852, Period: 96 hours continuously
	Humidity	Contact Resistance 40m , Insulation Resistance 1000m , Appearance: No damage	Relative humidity: 90-95% (RH), Period: 96 hours continuously
	Temperature Cycling	No breakdown or flashover	One cycle consists of -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles.