2.50 Series Strip Connector Suitable for AWG 22 to 28 Wires HCTL HC-XH-2Y-L-05 Electrical Connector
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 2.50 series strip connectors, including product performance, test methods, and inspection requirements. Designed for use with AWG #22 to #28 wires, these connectors are suitable for applications requiring reliable electrical connections.
Product Attributes
- Brand: HCT ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Nylon66 material)
Technical Specifications
| Item | Requirement | Test Mode | ||
|---|---|---|---|---|
| 1. Scope | ||||
| Contents of specifications for 2.50 series connector strip including product performance, test methods and inspection requirements. | ||||
| 2. Applicable Standards | ||||
| 2.1 GB/T2421 | Electrical Connectors Environmental Testing - Part 1: General Principles | |||
| 2.2 GB/T2423 | Electrical Connectors Environmental Testing Methods | |||
| 2.3 GB/T2424 | Electrical Connectors Environmental Testing Guidelines | |||
| 2.4 GB/T5095 | Basic Testing Rules and Measurement Methods for Electromechanical Components of Electronic Equipment | |||
| 3. Use Condition | ||||
| Ambient temperature Range | -25 +85 | |||
| Applicable Wire Sizes | AWG #2228 | |||
| Applicable PC board thickness | 1.6mm | |||
| 4. Appearance and Dimension | ||||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxidation, and peeling. | |||
| Dimension | According to drawings | |||
| Exchangeable | Exchangeable with same specification products. | |||
| 5. Material | ||||
| Part Name | Type | Material | Finish | Color |
| Terminal Contact | Brass | Tin plating: 2.55 m | ||
| Housing Plastic | Nylon66 | UL94V-O | White | |
| Wafer-A | Brass | Tin plating: 2.55 m | White | |
| Wafer-AW | Phosphor bronze | Tin plating: 24 m | White | |
| Wafer-AWD | Brass | Tin plating: 2.55 m | White | |
| 6. Electrical Performance | ||||
| Item | Rated Voltage | Rated Current | Requirement | Test Mode |
| Withstand voltage | 250V AC/DC | 3A | No breakdown or flashover | Apply 1000V AC(rms) for 1 minute between adjacent contacts and ground, leakage current must be less than 0.5mA. |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector. (Does not include wire resistance) | ||
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts. | ||
| 7. Mechanical Performance | ||||
| Item | Requirement | Test Mode | ||
| Single contact insertion force | 5.5N | Mate connectors at a rate of 253mm per minute. | ||
| Single contact Withdrawal force | 1.5N | Mate connectors at a rate of 253mm per minute. | ||
| Terminal crimping Wire strength | 13N (AWG#28) to 50N (AWG#22) | Axial pullout force at the terminal end at a rate of 253mm per minute. | ||
| Pin Retention Force | 20N | Exerts a force on the pin end at a rate of 253mm per minute until the needle exits the seat. | ||
| Fixed terminals And hole seat | 10N | Pullout force test of terminal and hole seat in the wire direction at a rate of 253mm per minute. | ||
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up 30 cycles at a rate of 10 cycles per minute prior to environmental test. | ||
| Vibration | Current Discontinuity: Max 1 sec; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/minute; Duration: 2 hours for each direction (X, Y, Z axis). | ||
| 8. Endurance Characteristics | ||||
| Item | Requirement | Test Mode | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously. | ||
| Temperature Rise | Measure contact temperature rise when maximum rated current is passed through the mate connector. | |||
| Constant Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Temperature: 402 C; Relative humidity: 90-95% (RH); Period: 96 hours continuously. | ||
| Temperature Cycling | No breakdown or flashover; Appearance: No damage | One cycle: -553C (30min) to 853C (30min), with 10-15min transition time. Total cycles: 5. | ||
| Salt Spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353 C; Concentration: 51%; Period: 24H. After test, rinse with clean water and dry naturally. | ||
| Solder ability | Soldering area: 90% | Solder temperature: 2455C; Immersion period: 30.5S. | ||
| Manual Soldering | Appearance: No damage | Soldering time: 30.5S; Soldering pot: 3505. Position: 1.5mm from conductor end (DIP type), 0.5mm from conductor end (SMT type). | ||
| Wave Soldering | Appearance: No damage | Soldering time: 50.5S; Soldering pot: 2605. | ||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina