2 Millimeter Pitch Double Row PHB Connector Strip HCTL HC-PHB-2*10EY-05 for Electronic Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document details the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It covers product performance, test methods, and inspection requirements for this series of strip connectors. The product is designed for electrical and electronic applications, offering reliable performance under various environmental conditions.

Product Attributes

Brand: (HCTLDZ)
Origin: China
Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
Color: Nature (for Housing Plastic and Plastic Wafer)

Technical Specifications

Section	Item	Requirement	Test Mode
Scope	1. Scope	This specification applies to the 2.00 series connector strip, including product performance, test methods, and inspection requirements.
Applicable Standards	2.1 GB/T2421	Testing method for Environmental of Electrical Connectors
	2.2 GB/T2423	Electrical electronic product environmental test - Part 1: General principles
	2.3 GB/T2424	Testing method for Environmental of Electrical Connectors
	2.4 GB/T5095	Testing procedure/method for components of electric equipment
Use Condition	3.1 Ambient temperature Range	-25 85
	3.2 Applicable Wire Sizes	AWG #2228
	3.3 Applicable PC board thickness	1.6mm
Appearance and Dimension	4.1 Appearance	Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling.
	4.2 Dimension	According to drawings
	4.3 Exchangeable	Exchangeable with same specification products.
Material	5.1 Terminal Contact	Brass, 0.50mm thickness, Tin plating: 2.55 m
	5.2 Housing Plastic	Nylon66, UL94V-O, Color: Nature
	5.3 Plastic Wafer	Nylon66, UL94V-O, Color: Nature
	5.4 Contact Pin	Brass, 0.50mm thickness, Tin plating: 2.55 m
Electrical Performance	6.1 Rated Voltage	250V AC/DC
	6.2 Rated Current	2A AC/DC
	6.3 Withstand voltage	800V AC(rms) for 1 minute between adjacent contacts, leakage current 0.5mA. No breakdown or flashover.	Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors.
	6.4 Contact Resistance	20m (Initial value)	Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector. Does not include wire resistance.
	6.5 Insulation Resistance	1000 M	Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance.
Mechanical Performance	7.1 Terminal crimping Wire strength	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Axial pullout force at a rate of 25 3mm per minute.
	7.2 Fixed terminals And hole seat	12N	The terminal and the hole seat are pulled out from the hole in the seat capacity at a rate of 25 3mm per minute along the wire direction.
	7.3 Single contact insertion force	5N	Housing together with terminal ends with wafer matched at a rate of 25 3mm per minute inserting force test.
	7.4 Single contact Withdrawal force	0.3N
	7.5 Pin Retention Force	15N	Exerts a force on the pin end at a rate of 253mm per minute until the needle exits the seat.
	7.6 Durability	Contact Resistance 40m, Appearance: No damage	Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test.
	7.7 Vibration	Contact Resistance 40m, Current Discontinuity 1 sec, Appearance: No damage	Amplitude: 1.5mm p-p. Directions: X, Y, Z axes. Frequency: 10-55-10Hz/minute. Period: 2 hours for each direction.
Environmental Performance	8.1 Thermal Aging	Contact Resistance 40m, Appearance: No damage	Connector combination condition is placed in a heating oven. Temperature: 852. Period: 96 hours continuously.
	8.2 Temperature Rise	Measure the temperature rise of contact when the maximum rated current is passed.
	8.3 Humidity	Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage	Connector combination under constant temperature and humidity. Temperature: 402. Relative humidity: 90-95% (RH). Period: 96 hours continuously.
	8.4 Temperature cycling	Contact Resistance 40m, Insulation Resistance 1000m, Withstand voltage: No breakdown or flashover, Appearance: No damage	One cycle: -553 for 30min, room temp for 10-15min; then 853 for 30min, room temp for 10-15min. Total cycles: 5.
	8.5 Salt spray	Contact Resistance 40m, Appearance: No damage	Temperature: 353. Concentration: 51%. Period: Stamping before tin plated for 24 hours OR Stamping after tin plated for 8 hours.
	8.6 Solder ability	Soldering area: 90 %	Solder temperature: 2455. Immersion period: 3 0.5S.
	8.7 Resistance to soldering heat	Appearance: No damage	Manual soldering: Soldering temperature: 350 5. Soldering time: 3 0.5S. Position: 1.5mm distance from conductor or fixed piece end. Wave soldering: Soldering temperature: 260 5. Soldering time: 5 0.5S.