HRS TF31-24S-0.5SH800 connector featuring mechanical and electrical testing for FPC FFC connectivity

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product specification sheet details the technical requirements and performance characteristics for a connector designed for FPC/FFC (Type A: t=0.30.03mm, Type B: t=0.30.05mm) applications. It outlines electrical, mechanical, and environmental testing criteria to ensure reliability and performance.

Product Attributes

Brand: HIROSE KOREA CO.,LTD.
Applicable Standard: JEIDA-38, MIL-STD-202, JIS C 5402
Origin: Korea

Technical Specifications

Item	Test Method	Requirements	Applicable
OPERATING TEMPERATURE RANGE		-40 ~ +105 (note1)
STORAGE TEMPERATURE RANGE		-10 ~ +50(Packed Condition)
VOLTAGE		50V [AC(rms) / DC]
CURRENT		0.5A [AC(rms) / DC] (note2)
OPERATING OR STORAGE HUMIDITY RANGE		RELATIVE HUMIDITY 90% MAX (NOT DEWED)
CONSTRUCTION	GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT ACCORDING TO DRAWING	MARKING CONFIRMED VISUALLY
CONTACT RESISTANCE	MATE APPLICABLE FPC/FFC AND APPLY A CURRENT OF 1mA INCLUDING FPC/FFC BULK RESISTANCE(L=8mm)	50 m MAX. AC 20mV MAX,	O O
VOLTAGE PROOF	MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF AC 150V FOR 1 min.	NO BREAKDOWN.	O O
INSULATION RESISTANCE	MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF DC 100V	500 M MIN.	O O
FPC RETENSION FORCE	MEASURE BY APPLICABLE FPC/FFC(t=0.3)	HORIZONTAL DIRECTION : 0.4Nn min. VERTICAL DIRECTION : 0.3Nn min. (n = Number of Contacts)(note 3)	O - IN 3 DIRECTIONS.
DAMP HEAT(STEADY STATE)	EXPOSED AT 402, 90~95 %, 96Hr.	CONTACT RESISTANCE: 50 m MAX.	O - O -
SHOCK	DIRECTION OF PULSE 981m/s2 6ms AT 3 TIMES	NO ELECTRICAL DISCONTINUITY OF 1. CONTACT RESISTANCE : 50m MAX NO DAMAGE,CRACK AND LOOSENESS OF PARTS	O - O -
RAPID CHANGE OF TEMPERATURE	TEMPERATURE:-40215~35+105215~35 TIME : 30 2~3 30 2~3 min. UNDER 5 CYCLES.	CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	O -
DRY HEAT	EXPOSED AT 1052, 96Hr	CONTACT RESISTANCE : 50m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	O -
COLD	EXPOSED AT -402, 96Hr	NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	O -
DAMP HEAT, CYCLE	TEMPERATURE -10+65 10 CYCLE(240Hr)	INSULATION RESISTANCE: 50M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	O -
HYDROGEN SULPHIDE	EXPOSED IN 3 PPM FOR 96Hr. (TEST STANDARD : JEIDA-38)	NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR.	O -
CORROSION SALT SPRAY	EXPOSED AT 352, 51% SALT WATER SPRAY FOR 48Hr	CONTACT RESISTANCE 50m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	O -
RESISTANCE TO SOLDERING HEAT	1) REFLOW SOLDERING: PEAK TMP. : 250 MAX. TMP. 230 MIN FOR 60s 2) SOLDERING IRONS TMP. : 35010 FOR 51s THE SURFACE BEING IMMERSED.	NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. NO DAMAGE OF ELECTRICAL PERFORMANCE	O -
SOLDER ABILITY	SOLDER DIPPING TEMPERATURE 2455 FOR IMMERSION DURATION, 30.3 sec. (TEST STANDARD : MIL-STD-202)	A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95% OF THE SURFACE BEING IMMERSED.	O -
MECHANICAL OPERATION		20 TIMES INSERTIONS AND EXTRATIONS