FPC FFC connector HRS TF13BSA-20S-0.4SH 800 with tested performance in temperature humidity extremes
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product is a connector designed for FPC/FFC applications. It offers reliable electrical and mechanical performance, with specific characteristics for contact resistance, insulation resistance, and retention force. It is suitable for use in various environmental conditions and meets stringent testing standards.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Origin: HIROSE KOREA CO.,LTD.
- Applicable Standard: JIS C 5402
- Copyright: 2024 HIROSE ELECTRIC CO., LTD.
Technical Specifications
| Item | Test Method | Requirements | Rating | Conditions |
| OPERATING TEMPERATURE RANGE | -10 ~ +50(Packed Condition) | |||
| STORAGE TEMPERATURE RANGE | -55 ~ +85 | |||
| OPERATING OR STORAGE HUMIDITY RANGE | Relative Humidity 90% MAX(NOT DEWED) | |||
| VOLTAGE | 50V [AC(rms) / DC] | |||
| RATING CURRENT | 0.5A [AC(rms) / DC] (note1) | |||
| CONTACT RESISTANCE | INITIAL CONDITION | 100m MAX | 1mA DC(OR 1,000Hz) INCLUDING FPC/FFC BULK RESISTANCE(L=8mm) | |
| INSULATION RESISTANCE | DC 100V | 500 M MIN. | ||
| FPC RETENSION FORCE | VERTICAL DIRECTION | 0.25N X n MIN. | APPLICABLE FPC/FFC(t=0.2) | |
| FPC RETENSION FORCE | HORIZONTAL DIRECTION | 0.25N X n MIN. | APPLICABLE FPC/FFC(t=0.2) | |
| VOLTAGE PROOF | AC 150V FOR 1 min. | NO FLASHOVER OR BREAKDOWN. | MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF | |
| MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRACTIONS | CONTACT RESISTANCE: 100m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | ||
| VIBRATION | FREQUENCY 10 ~ 55 Hz, HALF AMPLITUDE 0.75 mm AT 2h, IN 3 DIRECTIONS | CONTACT RESISTANCE : 100m MAX NO DAMAGE,CRACK AND LOOSENESS OF PARTS | ||
| SHOCK | DIRECTION OF PULSE 981m/s2 6ms AT 3 TIMES IN 3 DIRECTIONS | CONTACT RESISTANCE: 100 m MAX. NO DAMAGE, CRACK OR LOOSENESS OF PARTS | ||
| DAMP HEAT(STEADY STATE) | EXPOSED AT 40, 90~95 %, 96Hr. | CONTACT RESISTANCE: 100m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | ||
| DAMP HEAT, CYCLE | TEMPERATURE : -55 15~35 +85 15~35 TIME : 30 2~3 30 2~3 min. 5 CYCLES WITH ABOVE CONDITIONS. | CONTACT RESISTANCE: 100 m MAX. NO DAMAGE, CRACK OR LOOSENESS OF PARTS NO EVIDENCE OF CORROSION WHICH AFFECTS | ||
| DRY HEAT | EXPOSED AT 85, 96Hr | CONTACT RESISTANCE: 100m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | ||
| COLD EXPOSED | EXPOSED AT -55, 96Hr | CONTACT RESISTANCE: 100m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | ||
| SALT SPRAY | EXPOSED AT 35, 5 % SALT WATER SPRAY FOR 96Hr (TEST STANDARD : JEIDA-38) | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | ||
| HYDROGEN SULPHIDE | EXPOSED IN 3 PPM FOR 96Hr. | CONTACT RESISTANCE: 100m MAX. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. NO EVIDENCE OF CORROSION WHICH AFFECTS | ||
| RAPID CHAGE OF TEMPERATURE | -10+65 HUMIDITY : 90~95% 10 CYCLE(240Hr) | CONTACT RESISTANCE: 100m MAX. INSULATION RESISTANCE: 100 M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | ||
| RESISTANCE TO SOLDERING HEAT | SOLDER DIPPING TEMPERATURE 2455 30.3 SEC | THE SURFACE BEING IMMERSED. SHALL COVER A MINIMUM OF 95% OF A NEW UNIFORM COATING OF SOLDER | (TEST STANDARD : MIL-STD-202) | |
| SOLDER ABILITY | PROFILE : 250 MAX. | |||
| GENERAL EXAMINATION | CONSTRUCTION | CONFIRMED VISUALLY | VISUALLY AND BY MEASURING INSTRUMENT | |
| ELECTRICAL CHARACTERISTICS | NO ELECTRICAL DISCONTINUITY OF 1. | MATE APPLICABLE FPC/FFC AND APPLY A CURRENT OF | ||
| MECHANICAL CHARACTERISTICS | VERTICAL DIRECTION : 0.25N X n MIN. HORIZONTAL DIRECTION : 0.25N X n MIN. | APPLICABLE FPC/FFC(t=0.2) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina