Electronic connector HRS FH40-20S-0.5SV with tested assurance and wide operating temperature range

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product is a connector designed for various electronic applications. It offers a reliable connection with specified electrical and mechanical characteristics, suitable for operating in a wide temperature range and under humid conditions. It is designed for use with specific cable types and meets stringent testing requirements for quality assurance.

Product Attributes

Brand: HIROSE ELECTRIC CO., LTD.
Part Number: FH40-**S-0.5SV
Code Number: CL580
Drawing Number: ELC4-159298-00
Revision Date: Aug.1.2024
Applicable Cable: t=0.30.05mm, GOLD PLATING
Note: Unless otherwise specified, refer to IEC 60512.
Note: When the same value of current are applied to all contacts at the same time in once, set the current to the 70 % of the rated current value.
Remark: In case of consideration for using Automotive equipment / device which demand high reliability, kindly contact our sales window correspondents.

Technical Specifications

Item	Test Method	Requirements	QT	AT
APPLICABLE STANDARD OPERATING TEMPERATURE RANGE		-40 C TO 105 C
STORAGE TEMPERATURE RANGE		-10 C TO 50 C (PACKED CONDITION)
RATING VOLTAGE		50 V AC / DC
OPERATING OR STORAGE HUMIDITY RANGE	RELATIVE HUMIDITY	90 % MAX (NOT DEWED)
CURRENT		0.5 A
CONSTRUCTION GENERAL EXAMINATION	VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.
MARKING	CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE	AC 20 mV MAX ( 1 KHz ) , 1 mA .	50 m MAX. INCLUDING FPC,FFC BULK RESISTANCE (L=8mm)
INSULATION RESISTANCE	100 V DC.	500 M MIN.
VOLTAGE PROOF	150 V AC FOR 1 min.	NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS MECHANICAL OPERATION	20 TIMES INSERTIONS AND EXTRACTIONS.	CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
VIBRATION	FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE 0.75 mm, m/s2 FOR 10 CYCLES IN 3 AXIAL DIRECTIONS.	NO ELECTRICAL DISCONTINUITY OF 1 s. CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
SHOCK	981 m/s2 , DURATION OF PULSE 6 ms AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
FPC RETENTION FORCE	MEASURED BY APPLICABLE FPC. (THICKNESS OF FPC SHALL BE t=0.30mm AT INITIAL CONDITION.)	DIRECTION OF INSERTION: 0.3Nn MIN. VERTICAL DIRECTION TO INSERTION: 0.2Nn MIN. (n:NUMBER OF CONTACTS)
ENVIRONMENTAL CHARACTERISTICS RAPID CHANGE OF TEMPERATURE	TEMPERATURE-40+15TO+35+105+15TO+35C TIME 30 2 TO 3 30 2 TO 3 min UNDER 5 CYCLES.	CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50 M MIN. NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
DAMP HEAT (STEADY STATE)	EXPOSED AT 402C, RELATIVE HUMIDITY 90 TO 95 %, 96 h.
DAMP HEAT, CYCLIC	EXPOSED AT -10 TO +65 C, RELATIVE HUMIDITY 90 TO 96 %, 10 CYCLES,TOTAL 240 h.	CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 1 M MIN. (AT HIGH HUMIDITY) INSULATION RESISTANCE: 50 M MIN. (AT DRY) NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
DRY HEAT	EXPOSED AT 1052 C, 96 h.	CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
COLD	EXPOSED AT -403C, 96 h.
CORROSION SALT MIST	EXPOSED AT 352C , 5 % SALT WATER SPRAY FOR 96 h.	CONTACT RESISTANCE: 50 m MAX. NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR.
SULPHUR DIOXIDE [JIS C 60068-2-42]	EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,255 ppm FOR 96 h.
HYDROGEN SULPHIDE [JIS C 60068-2-43]	EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,10 TO 15 ppm FOR 96 h.
RESISTANCE TO SOLDERING HEAT	1) REFLOW SOLDERING PEAK TMP. 250 C MAX . REFLOW TMP. OVER 230 C WHITIN 60 sec. 2) SOLDERING IRONS : TMP. 3505C FOR 51 sec .	NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS.
SOLDERABILITY	SOLDERED AT SOLDER TEMPERATURE, 2455 C FOR IMMERSION DURATION, 20.5 sec.	A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED.