electrical connector HRS DF14-8S-1.25C 10 designed for demanding electronic application environments

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product is a connector designed for various electronic applications, offering reliable electrical characteristics and mechanical durability. It is rated for specific operating and storage conditions, ensuring performance across a range of environmental factors.

Product Attributes

Brand: HIROSE ELECTRIC CO., LTD.
Part Number: DF14A-*P-1.25H(65)
Code Number: CL538
Drawing Number: ELC-160309-65-00
Applicable Connector: DF14-*S-1.25C
Applicable Contact: DF14-****SCFA(##)
Revision Date: May.1.2024
Copyright: 2024 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Technical Specifications

Item	Test Method	Requirements	QT
CONSTRUCTION
GENERAL EXAMINATION	VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING.	X	X
MARKING	CONFIRMED VISUALLY.	X	X
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE	20 mV MAX, 1mA (DC OR 1000 Hz)	30 m MAX.	X
INSULATION RESISTANCE	100 V DC.	500 M MIN.	X
VOLTAGE PROOF	500 V AC FOR 1 min.	NO FLASHOVER OR BREAKDOWN.	X
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION	50 TIMES INSERTIONS AND EXTRACTIONS.	1) CONTACT RESISTANCE: 30 m MAX. 2) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X
VIBRATION	FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE 0.75 mm, AT 2 h, FOR 3 DIRECTIONS.	1) NO ELECTRICAL DISCONTINUITY OF 1s. 2) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X
SHOCK	490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES FOR 3 DIRECTIONS.		X
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF TEMPERATURE	TEMPERATURE -55 +85 5 TO 35 C TIME 30 10 TO 1530 10 TO 15 min. UNDER 5 CYCLES.	1) CONTACT RESISTANCE: 30m MAX. 2) INSULATION RESISTANCE: 500 M MIN. 3) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.	X
DAMP HEAT (STEADY STATE)	EXPOSED AT 402 C, 90 ~ 95 , 96 h.		X
RESISTANCE TO SOLDERING HEAT	1) REFLOW SOLDERING REFLOW AREA MAX 250C WITHIN 10 sec MIN 230C WITHIN 60 sec PREHEATING AREA 170C TO 190C 60 sec TO 120 sec PUT THROUGH IN REFLOW FUMACE TWICE. LEAVE IN AMBIENT TEMPERATURE AND HUMIDITY FOR 1 HOUR. CONNECTOR TEMPERTURE TO BE AMBIENT FOR SECOND REFLOW. 2) MANUAL SOLDERING SOLDERING IRON TEMPERATURE 3505 C, FOR51 sec.	NO STRENGTH ON CONTACT. NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS.	X
SOLDERABILITY	SOLDERING TEMPERATURE : 2455C DURATION OF IMMERSION : SOLDERING, FOR 3sec.	A NEW UNIFORM COATING OF SOLDER SHALL COVER MINIMUM OF 95 OF THE SURFACE BEING IMMERSED.	X

Operating Conditions

Operating Temperature Range: -35C TO +85C (Note 1)
Storage Temperature Range: -10C TO +60C (Note 3)
Operating Humidity Range: 40 % TO 80 % (Note 2)
Storage Humidity Range: 40 % TO 70% (Note 3)
Current: 1 A/pin
Voltage: 150 V AC (DC)

Remarks

Note 1: Including the temperature rise by current.
Note 2: No condensing.
Note 3: Apply to the condition of long term storage for unused products before mounted on PCB. After mounted on PCB, operating temperature and humidity range is applied for interim storage during transportation.