1mm Pitch Board to Cable Lock Connector HRS DF50S-30DS-1C with Robust Structure and Lance Design

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

DF50 Series 1mm Pitch Board to Cable Lock Connector

The DF50 Series is a 1mm pitch board-to-cable lock connector designed for secure mating with a clear tactile click. It features a robust structure resistant to wrenching forces, a reliable lance structure for high strength, and an ensured adsorption area that eliminates the need for an adsorption gap, allowing for automatic mounting. With an insulation outer diameter of 0.9mm, it is compatible with AWG#28 cable.

Product Attributes

Brand: DF50 Series
Pitch: 1mm
Material (Header Insulator): LCP (Black, UL94V-0)
Material (Header Contact): Brass (Gold plating)
Material (Header Metal fitting): Brass (Tin Plating)
Material (Header Locking metal fittings): Stainless steel
Material (Crimp socket Insulator): PBT (Black - DF50A, White - DF50S, UL94V-0)
Material (Crimp contact): Phosphorous Bronze (Gold plating)
Certifications: UL94V-0

Technical Specifications

Specification	Value	Conditions
Current Rating	1A
Voltage Rating	AC/DC 100V
Operating Temperature Range	-35 to +85C (Note 1)
Operating Humidity Range	20 to 80%
Storage Temperature Range	-10 to +60C (Note 2)
Storage Humidity Range	40 to 70% (Note 2)
Insulation resistance	No less than 500M	Measured at DC 100V
Withstand voltage	No flashover or breakdown	AC300V is applied for one minute
Contact resistance	No more than 30m	Measured at 1mA and no higher than 20mV
Vibration Resistance	No electric outage of 1s or greater	10 cycles in each of three directions at frequency 10-55 Hz, half amplitude 0.75 mm
Shock Resistance	No electric outage of 1s or greater	Accelerated velocity: 490m/s for 11ms, half-sine in 3 directions, 3 times for each direction
Moisture-resistance	Contact resistance: no more than 50m; insulation resistance: no less than 100M	Temperature: 402C; humidity: 90 to 95%, left as it is for 96 hours
Temperature cycles	Contact resistance: no more than 50m; insulation resistance: no less than 500M	(-55C for 30 minutes 5 to 35C for 2 to 3 minutes 85C for 30 minutes 5 to 35C for 2 to 3 minutes) in 5 cycles
Push-pull durability life	Contact resistance: no more than 50m	30 times of push-pull operation
Solder Heat Resistance	There should be no dissolution of the resin part which will influence the performance.	Reflow: according to the Recommended Temperature Profile; Hand soldering: temperature of soldering iron at 350C for 3 to 4 seconds