Connector HRS DF51-14DS-2C engineered for electrical and mechanical stability in demanding environments
Product Overview
This product is a connector designed for various applications. It offers reliable electrical and mechanical performance within specified operating and storage conditions. The connector supports a range of wire gauges and is suitable for applications requiring specific voltage and current ratings, including UL and C-UL certifications.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Certifications: UL, C-UL
Technical Specifications
| Item | Test Method | Requirements | QT | AT |
| Environmental Characteristics | ||||
| Operating Temperature Range | -55 to +105C (Note1) | |||
| Storage Temperature Range | -10 C to +60C (Note3) | |||
| Operating Humidity Range | 20% to 80% (Note2) | |||
| Storage Humidity Range | 40% to 70% (Note3) | |||
| Damp Heat (Steady State) | 40 2C, 90 to 95% humidity, 96 h. (After leaving room temp for 1-2h) | 1.Insulation resistance: 500 M MIN. 2.No damage, crack or looseness of parts. | 3 | X |
| Rapid Change Of Temperature | -55C +105C, 30min 30min, Under 5 Cycles. (Transfer time 2-3 MIN) (After leaving room temp for 1-2h) | 1.Insulation resistance: 1000 M MIN. 2.No damage, crack or looseness of parts. | 3 | X |
| Dry Heat | 1052C, 96h | X | ||
| Cold | -553C, 96h | X | ||
| Electrical Characteristics | ||||
| Insulation Resistance | 500 V DC | 1000 M MIN. | X | |
| Voltage Proof | 650 V AC for 1 min | No flashover or breakdown. | X | |
| Mechanical Characteristics | ||||
| Mechanical Operation (Sn Plating) | 30 times insertion and extraction | No damage, crack or looseness of parts. | 3 | X |
| Mechanical Operation (Au Plating) | 50 times insertion and extraction | X | ||
| Mating and Unmating Force (Sn Plating) | It takes out and inserts with a conformity connector. | 1.Insertion Force : 64.2N MAX. 2.Extraction Force : 3.7N MIN. | X | |
| Mating and Unmating Force (Au Plating) | It takes out and inserts with a conformity connector. | 1.Insertion Force : 44.7N MAX. 2.Extraction Force : 3.5N MIN. | X | |
| Vibration | Frequency 10 to 55 Hz, single amplitude 0.75 mm, at 10 cycles for 3 direction. | No damage, crack or looseness of parts. | 3 | X |
| Shock | Acceleration 490 m/s, duration of pulse 11 ms at 3 times for 3 directions. | X | ||
| Contact Extraction Force | Pull out the cable after housing fixation. | 11.8N MIN | X | |
| Applicable Standards & Ratings | ||||
| Applicable Connector | DF51A-14DP-2DSA/DS(##) DF51-14DEP-2C(##) | |||
| Applicable Contact | DF11-22SC(A)/SCF(A) DF11-2428SC(A)/SCF(A) DF11-30SC(A)/SCF(A) | |||
| Current Rating (General) | AWG 22 to 24 : 2.0A AWG 26 : 1.5A AWG 28 : 1.0A AWG 30 : 0.5A | |||
| ULC-UL Rating Voltage | 30V AC/DC | |||
| ULC-UL Rating Current | AWG 22 : 2.0A AWG 24 to 28 : 1.0A AWG 30 : 0.5A | |||
Notes:
Note 1: Include the temperature rising by current.
Note 2: No condensing.
Note 3: Apply to the condition of long term storage for unused products before mount on pcb. After mounted on pcb, operating temperature and humidity range is applied for interim storage during transportation.
Unless otherwise specified, refer to IEC 60512.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.