Electrical Connector JINJIA XLR-23FW with High Voltage Withstand and Mechanical Durability Standards
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. It details the electrical, mechanical, durability, and environmental performance requirements for these connectors.
Product Attributes
- Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
- Origin: China
- Document Number: JJR-WI-48
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | Practical temperature range | -30 to +80 | |
| Humidity range | 85% RH.MAX. | ||
| Preservation temperature range | -10 to +40 | ||
| Humidity range | 85% RH.MAX. (No Acid Alkaline Or Other Corrosive Airs. Storage Period Not Exceed 180 Days) | ||
| Rated voltage and current (MAX.) | 250V AC, 15A (continuous); 30A audio signal, duty cycle 50% | ||
| 2-4. Appearance | No scratches, soil, rust or discoloration on the surface. | ||
| 4. Electrical efficiency / | Withstand Voltage | Withstand AC 4000V (50/60Hz RMS) between two non-contact terminals for 1 minute. | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 1000 M Min. | |
| Contact Resistance | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA). | 30 m MAX. | |
| 5. Mechanical Performance | Terminal Strength | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc., but terminal deformation is acceptable. |
| 6. Durability / | Life test | Under no load, plug in/out with a matching plug for 5000 times at a frequency of 5 times per minute. | Appearance: No obvious change or destruction. |
| Contact resistance: less than 50 m. | |||
| 7. Solderability / | Resistance to soldering heat | Dip terminal in solder at 2603 for 51 seconds. | Plastic base should not be deformed, and terminals should not fall off. |
| Solderability | Dip in solder at 2453C for 30.5 seconds. | Solder coating area should be more than 95%. | |
| 8. Environment test / | Cold test | Place housing at -30 3 C for 96 hours, then under standard conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| Heat test | Store housing at 802 for 96 hours, then under standard conditions for 1 hour. | ||
| Humidity test | Store housing at 403 with 90% ~ 95% RH for 96 hours, then under standard conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | |
| Temperature Cycling | Conditions as shown in drawing (not provided), then at room temperature for 30 minutes. | ||
| Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment. | No obvious rust in the appearance. | |
| 9. Test condition / | Standard: 15C~35C, 25%~85% RH, 86kPa~106kPa. If doubts arise: 201C, 63%~67% RH, 86kPa~106kPa. | ||
| 10. Amendment / | Amendments require negotiation and agreement between manufacturer and customer. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina