Durable audio signal connector JINJIA XLR-23B rated 250V AC 15A suitable for electronic applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. These connectors are designed for audio signal applications and are not to be used as AC mains or power supply connectors.
Product Attributes
- Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
- Origin: China
- Document Number: JJR-WI-48
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | |||
| 2-1. Practical temperature range | Applicable temperature range | -30 to +80 | |
| Humidity range | 85% RH.MAX. | ||
| 2-2. Preservation temperature range | Storage temperature range | -10 to +40 | |
| Humidity range | 85% RH.MAX. | ||
| Storage environment | Ambient air without acid, alkaline or other corrosive gases. Storage period not exceeding 180 days. | ||
| 2-3. Rated voltage and current (MAX.) | Maximum rated voltage and current | (continuous) | 250V AC, 15A |
| Audio signal | Duty cycle 50% | 30A | |
| Attention | Warning | SPEAKON is NOT to be used as an AC mains or power supply connector! | |
| 2-4. Appearance | Surface condition | No scratches, soil, rust or discoloration. | |
| 4. Electrical efficiency / | |||
| 4-1 Withstand Voltage | Withstand AC voltage | Between two non-contact terminals for 1 minute | 4000V (50/60Hz RMS). No dielectric breakdown shall occur. |
| 4-2 Insulation Resistance | Insulation resistance | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds. | 1000 M Min. |
| 4-3 Contact Resistance | Contact resistance | Measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. |
| 5. Mechanical Performance / | |||
| Terminal Strength | Terminal strength | Withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc. Terminal deformation is acceptable. |
| 6. Durability / | |||
| Life test | Durability | Under no load, rotate and then plug in/out with a matching plug for 5000 times at a frequency of 5 times per minute. | Appearance with no obvious change or destruction. Contact resistance: less than 50 m. |
| 7. Solderability / | |||
| 7-1 Resistance to soldering heat | Heat resistance | Dip terminal in solder at 2603 for 51 seconds. | Plastic base should not be deformed and terminals should not fall off. |
| 7-2 Solderability | Solderability | Dip in solder at 2453C for 30.5 seconds. | Solder coating area should be more than 95%. |
| 8. Environment test / | |||
| 8-1 Cold test | Low temperature test | Place housing at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour and test. | Appearance with no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| 8-2 Heat test | High temperature test | Store housing at 802 for 96 hours, then under standard atmospheric conditions for 1 hour and test. | |
| 8-3 Humidity test | Humidity resistance test | Store housing at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour and test. | Appearance with no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| 8-5 Salt spray test | Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after the experiment. | No obvious rust in the appearance. |
| 9. Test condition / | |||
| General test conditions | Temperature, Humidity, Atmospheric Pressure | Unless otherwise specified: 15C to 35C, 25% to 85% RH, 86 kPa to 106 kPa. For judgment doubts: 201C, 63% to 67% RH, 86 kPa to 106 kPa. | |
| 10. Amendment / | |||
| Specification Amendment | Procedure | Must be negotiated and agreed by the manufacturer and the customer before proceeding. | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina