XLR jack JINJIA XLR-18-2-N3GR with no surface defects ensuring durability in electronic applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

XLR Jack Specification

This specification applies to XLR jacks used in electronic products. It details the electrical, mechanical, durability, and environmental performance characteristics of the product.

Product Attributes

Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
Origin: China
Document Number: JJR-WI-47
Issue Date: 2008-09-10
Version: A1

Technical Specifications

Section	Item	Property	Test Condition	Performance
2. Rated /	Practical temperature range	-30 to +80	-	-
2. Rated /	Humidity range	85% RH.MAX.	-	-
2. Rated /	Preservation temperature range	-10 to +40	-	-
	Humidity range	85% RH.MAX.	-	-
	Storage Period	Not Exceed 180 Days (in non-corrosive air)	-	-
2. Rated /	Rated voltage and current (MAX.)	50V AC, 6A	-	-
2. Rated /	Appearance	No scratches, soil, rust or discoloration on the surface.	-	-
3. Construction /	Outline And Dimension	Should match the attachment drawing.	-	-
3. Construction /	Part And Material	Should be consistent with the material list specifications.	-	-
4. Electrical efficiency /	Withstand Voltage	Withstand AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute. No dielectric breakdown shall occur.	Between two non-contact terminals	No dielectric breakdown
4. Electrical efficiency /	Insulation Resistance	10000 M Min.	Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds.	10000 M Min.
4. Electrical efficiency /	Contact Resistance	30 m MAX.	Measure tail end of matched terminals (voltage max 20mV, current max 100mA).	30 m MAX.
5. Mechanical Performance /	Insertion and withdrawal forces	Insertion: 35 N max. Withdrawal: 2 N min.	Rate of insertion/withdrawal: 2 mm/s. Mating of complete connectors without latching device.	Insertion: 35 N max. Withdrawal: 2 N min.
5. Mechanical Performance /	Terminal Strength	No looseness, damage, etc. (deformation acceptable).	Withstand a force of 0.5 kgf for 10 seconds.	No looseness, damage
6. Durability /	Life test	Contact resistance: less than 50 m.	No load, rotate and plug/unplug with matching plug for 1000 times (frequency 5 times/min).	Appearance no obvious change, destruction. Contact resistance
7. Solderability /	Resistance to soldering heat	Plastic base should not be deformed and terminals should not fall off.	Dip in solder at 2603 for 51 seconds.	No deformation, no terminal detachment
7. Solderability /	Solderability	Coating of solder area should be more than 95%.	Solder temperature: 2453C. Time of dip: 30.5 seconds.	Solder area > 95%
8. Environment test /	Cold test	Appearance no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.	Place at -30 3 C for 96 hours, then 1 hour under standard conditions.	Appearance OK, CR500M, WV:AC 1000V
	Heat test	-	Store at 802 for 96 hours, then 1 hour under standard conditions.	-
	Humidity test	Appearance no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.	Store at 403, 90%~95% RH for 96 h, then 1 hour under standard conditions.	Appearance OK, CR500M, WV:AC 1000V
	Salt spray test	No obvious rust in the appearance.	Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment.	No obvious rust
9. Test condition /	Standard Test Conditions	Temperature: 15C to 35C, RH: 25% to 85%, Pressure: 86 kPa to 106 kPa. (Specific conditions for doubt resolution: 201C, 63% to 67% RH, 86 kPa to 106 kPa)	-	-
10. Amendment /	Specification Amendment	Requires negotiation and agreement between manufacturer and customer.	-	-