Durable JINJIA XLR-15-N3B XLR Jack Connector Rated 50V AC 6A Ideal for Electronic Product Integration

Name: Durable JINJIA XLR-15-N3B XLR Jack Connector Rated 50V AC 6A Ideal for Electronic Product Integration
Brand: Hefei Purple Horn E-Commerce Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

XLR JACK SPECIFICATION

This specification applies to XLR jacks used in electronic products.

Product Attributes

Brand: Shenzhen jinjiarun Electronic Technology Co., Ltd
Origin: China
Document Number: JJR-WI-47
Issue Date: 2008-09-10
Version: A1

Technical Specifications

Item	Property	Test Condition	Performance
2. Rated /	Practical temperature range	-30 to +80
2. Rated /	Humidity range	85% RH.MAX.
	Preservation temperature range	-10 to +40
	Humidity range	85% RH.MAX. (No Acid Alkaline Or Other Corrosive Airs, Storage Period Not Exceed 180 Days)
	Rated voltage and current (MAX.)		50V AC , 6A
	Appearance		No scratches, soil, rust or discoloration on the surface.
3. Construction /	Outline And Dimension		Should match the attachment drawing.
3. Construction /	Part And Material		Should be consistent with the material list specifications.
4. Electrical efficiency /	Withstand Voltage	AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute	No dielectric breakdown shall occur.
	Insulation Resistance	Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds.	10000 M Min.
	Contact Resistance	Measure the tail end of each terminal (voltage max 20mV, current max 100mA) of a pair of matched terminals.	30 m MAX.
5. Mechanical Performance	Insertion and withdrawal forces	Rate of insertion/withdrawal: 2 mm/s (Mating of complete connectors without the effect of any latching or retaining device)	Insertion: 35 N max. Withdrawal: 2 N min.
5. Mechanical Performance	Terminal Strength	Withstand a force of 0.5 kgf for 10 seconds.	No looseness, damage, etc., but terminal deformation is acceptable.
6. Durability /	Life test	Under no load, rotate and then plug in, rotate and then pull out with a matching plug for 1000 times (frequency of 5 times per minute).	Appearance: No obvious change, destruction. Contact resistance: less than 50 m.
7. Solderability /	Resistance to soldering heat	Terminal dipped in solder: Temperature: 2603. Dip time: 51 seconds.	Plastic base should not be deformed and terminals should not fall off.
7. Solderability /	Solderability	Solder temperature: 2453C. Time of dip: 30.5 seconds.	Coating of solder area should be more than 95%.
8. Environment test /	Cold test	Housing placed at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour and tested.	Appearance: No obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
	Heat test	Housing stored at 802 for 96 hours, then under standard atmospheric conditions for 1 hour and tested.
	Humidity test	Housing stored at 403 with relative humidity of 90% ~ 95% for 96 h, then under standard atmospheric conditions for 1 hour and tested.	Appearance: No obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
	Temperature Cycling
	Salt spray test	Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Washed and dried at room temperature after experiment.	Appearance: No obvious rust.
9. Test condition /		Standard: 15C to 35C, 25% to 85% RH, 86 kPa to 106 kPa. Verification: 201C, 63% to 67% RH, 86 kPa to 106 kPa.
10. Amendment /		Amendments require negotiation and agreement between manufacturer and customer.