Durable JINJIA DC 02D 03 DC power jack connector rated 30V DC 2A with insulation resistance 100 M min
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to DC POWER JACK connectors used in electronic products. Designed for reliable electrical connections, these jacks offer specific operational and environmental tolerances.
Product Attributes
- Brand: Shenzhen JinJiaRun Electronics Technology Co.,Ltd
- Origin: Shenzhen
- Product Type: DC POWER JACK
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | Practical temperature range | -20 to +70 | 85% RH.MAX. Humidity |
| Preservation temperature range | -10 to +40 | 85% RH.MAX. Humidity | |
| Rated voltage and current (MAX.) | 30V DC, 2A | ||
| Appearance | No scratches, soil, rust or discoloration on the surface. | ||
| 4. Electrical efficiency / | Withstand Voltage | Withstand AC 500V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 100 M Min. | |
| Contact Resistance | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. | |
| 5. Mechanical Performance / | Insertion and Extraction Force | Plug and unplug with a matching plug at a frequency of 20-30 times per minute. | 0.33kgf |
| Terminal Strength | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc., but terminal deformation is acceptable. | |
| 6. Durability / | Life test | Under no load, plug and unplug with a matching plug for 5000 times at a frequency of 20-30 times per minute. | Appearance: No obvious change or destruction. Contact resistance: |
| 7. Solderability / | Resistance to soldering heat | Terminal dipped in solder at 2603 for 51 seconds. | Plastic base should not be deformed, terminals should not fall off. |
| Solderability | Solder temperature: 2453C. Dip time: 30.5 seconds. | Coating of solder area should be more than 95%. | |
| 8. Environment test / | Cold test | Housing placed at -25 3 C for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V. |
| Heat test | Housing stored at 852 for 96 hours, then under standard atmospheric conditions for 1 hour. | (Performance details not explicitly stated for heat test alone, but implied to meet general standards) | |
| Humidity test | Housing stored at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance: No obvious change. Contact resistance: 100m max. Insulation resistance: 100 M min. Withstand voltage: AC 500V. | |
| Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Washed and dried at room temperature after experiment. | No obvious rust in the appearance. | |
| 9. Test condition / | Standard Conditions | Test and measurement temperature: 15C to 35C, relative humidity: 25% to 85%, atmospheric pressure: 86 kPa to 106 kPa. | For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa. |
| 10. Amendment / | Modification Process | Specifications require negotiation and agreement between manufacturer and customer. | N/A |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina