Durable JINJIA XLR-15-N3L XLR jack designed for stable performance in electronic product connectivity

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

XLR Jack Specification

This specification applies to XLR jacks used in electronic products. The product is designed for reliable connectivity in various electronic applications.

Product Attributes

Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
Origin: China
Document Number: JJR-WI-47
Issue Date: 2008-09-10
Version: A1

Technical Specifications

Item	Property	Test Condition	Performance
2. Rated /	Practical temperature range	-30 to +80	-
2. Rated /	Humidity range	85% RH.MAX.	-
2. Rated /	Preservation temperature range	-10 to +40	-
2. Rated /	Humidity range	85% RH.MAX. (No acid alkaline or other corrosive airs, storage period not exceed 180 days)	-
2. Rated /	Rated voltage and current (MAX.)	-	50V AC, 6A
2. Rated /	Appearance	-	No scratches, soil, rust or discoloration on the surface.
3. Construction /	Outline And Dimension	Should match the attachment drawing.	-
3. Construction /	Part And Material	Should be consistent with the material list specifications.	-
4. Electrical efficiency /	Withstand Voltage	Withstand AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute. No dielectric breakdown shall occur.	-
4. Electrical efficiency /	Insulation Resistance	Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds.	10000 M Min.
4. Electrical efficiency /	Contact Resistance	Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA).	30 m MAX.
5. Mechanical Performance /	Insertion and withdrawal forces	Rate of insertion/withdrawal: 2 mm/s. Mating of complete connectors without the effect of any latching or retaining device.	Insertion: 35 N max. Withdrawal: 2 N min.
5. Mechanical Performance /	Terminal Strength	Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds.	No looseness, damage, etc., but terminal deformation is acceptable.
6. Durability /	Life test	Under no load, rotate and then plug in, rotate and then pull out with a matching plug for 1000 times in total, at a frequency of 5 times per minute.	Appearance no obvious change, destruction. Contact resistance: less than 50 m.
7. Solderability /	Resistance to soldering heat	Terminal dipped in solder: Temperature: 2603. Dip time: 51 seconds.	After test, plastic base should not be deformed and terminals should not fall off.
7. Solderability /	Solderability	Temperature of solder: 2453C. Time of dip: 30.5 seconds.	Coating of solder area should be more than 95%.
8. Environment test /	Cold test	Housing placed at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour and tested.	Appearance no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
	Heat test	Housing stored at 802 for 96 hours, then under standard atmospheric conditions for 1 hour and tested.	-
	Humidity test	Housing stored at 403 with relative humidity of 90% ~ 95% for 96 h, then under standard atmospheric conditions for 1 hour and tested.	Appearance no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
8. Environment test /	Temperature Cycling	Place the Jack under specified conditions and then place in stand at room temperature for 30 minutes.	-
8. Environment test /	Salt spray test	Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment.	No obvious rust in the appearance.
9. Test condition /	Standard conditions	Test and measurement temperature: 15C to 35C, relative humidity: 25% to 85%, atmospheric pressure: 86 kPa to 106 kPa. (For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa).	-
10. Amendment /	Procedure	Amendments require negotiation and agreement between manufacturer and customer.	-