JINJIA DC 02IA DC power jack connector suitable for various electronic power connection applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to DC POWER JACK connectors used in electronic products. The product is designed for reliable power connections within electronic devices.

Product Attributes

Brand: Shenzhen JinJiaRun Electronics Technology Co.,Ltd
Origin: Shenzhen
Type: DC POWER JACK

Technical Specifications

Item	Property	Test Condition	Performance
Rated /	Practical temperature range	-20 to +70, 85% RH.MAX.	N/A
Rated /	Preservation temperature range	-10 to +40, 85% RH.MAX.	N/A
Rated voltage and current(MAX.)		30V DC , 2A	N/A
Appearance		N/A	No scratches, soil, rust or discoloration on the surface.
Construction /	Outline And Dimension /	N/A	Should match the attachment drawing.
Construction /	Part And Material /	N/A	Should be consistent with the material list specifications.
Electrical efficiency /	Withstand Voltage /	Withstand AC 500V (50/60Hz RMS) between two non-contact terminals for 1 minute	No dielectric breakdown shall occur.
Electrical efficiency /	Insulation Resistance /	Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds.	100 M Min.
Electrical efficiency /	Contact Resistance /	Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA)	30 m MAX.
Mechanical Performance /	Insertion and Extraction Force / &	Plug and unplug with a matching plug at a frequency of 20-30 times per minute.	0.33kgf
Mechanical Performance /	Terminal Strength /	Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds.	No looseness, damage, etc., but terminal deformation is acceptable.
Durability /	Life test /	Under no load, plug and unplug with a matching plug for 5000 times at a frequency of 20-30 times per minute.	No obvious change in appearance, destruction. Contact resistance: < 30 m. Insertion and extraction force: 0.3 to 3 kgf.
Solderability /	Resistance to soldering heat /	Terminal dipped in solder: Temperature 2603, Dip time 51 seconds.	Plastic base should not be deformed and terminals should not fall off.
Solderability /	Solderability /	Temperature of solder: 2453C. Time of dip: 30.5 seconds.	Coating of solder area should be more than 95%.
Environment test /	Cold test /	Housing at -25 3 C for 96 hours, then 1 hour under standard conditions.	No obvious change in appearance. Contact resistance: 100m. Insulation resistance: 100 M. Withstand voltage: AC 500V.
	Heat test /	Housing at 852 for 96 hours, then 1 hour under standard conditions.	N/A
	Humidity test /	Housing at 403, 90% ~ 95% RH for 96 hours, then 1 hour under standard conditions.	No obvious change in appearance. Contact resistance: 100m. Insulation resistance: 100 M. Withstand voltage: AC 500V.
Salt spray test /	Temperature: 35 2, Solution: 5 1%, Spray time: 24 hours. Washed and dried at room temperature after experiment.	No obvious rust in the appearance.
Test condition /	Standard conditions	Temperature: 15C to 35C, Relative humidity: 25% to 85%, Atmospheric pressure: 86 kPa to 106 kPa. For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa.	N/A
Amendment /	N/A	Negotiated and agreed by manufacturer and customer.	N/A