audio signal connector JINJIA XLR-23F-N3B with wide preservation temperature range and corrosion resistance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. These connectors are designed for audio signal applications and are not to be used as AC mains or power supply connectors.
Product Attributes
- Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
- Origin: China
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | Practical temperature range | -30to +80 | - |
| Humidity range | 85% RH.MAX. | - | |
| Preservation temperature range | -10to +40 | - | |
| Preservation Humidity range | 85% RH.MAX. | - | |
| Storage Environment | Around air without acid, alkaline or other corrosive gases. Storage period not exceed 180 days. | - | |
| Rated voltage and current (MAX.) | 250V AC , 15A (continuous) | - | |
| Audio signal rating | 30 A, duty cycle 50 % | - | |
| 2-4. Appearance | Surface condition | No scratches, soil, rust or discoloration. | - |
| 4. Electrical efficiency | Withstand Voltage | Withstand AC 4000V (50/60Hz RMS) between two non-contact terminals for 1 minute. | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds. | 1000 M Min. | |
| Contact Resistance | Measure at the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) for a pair of matched terminals. | 30 m MAX. | |
| 5. Mechanical Performance | Terminal Strength | Each terminal should withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage; terminal deformation is acceptable. |
| 6. Durability | Life test | Under no load conditions, plug in/out with a matching plug for 5000 times at a frequency of 5 times per minute. | Appearance: No obvious change. Destruction: Contact resistance less than 50 m. |
| 8-3. Humidity test | Storage conditions | 403 with relative humidity of 90% ~ 95% for 96 h, then 1 hour in standard atmospheric conditions. | Appearance: No obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| 8-5. Salt spray test | Conditions | Temperature: 35 2, Solution: 5 1%, Spray time: 24 hours. Wash and dry at room temperature after experiment. | Appearance: No obvious rust. |
| 9. Test condition | Standard conditions | Temperature: 15C to 35C, Relative humidity: 25% to 85%, Atmospheric pressure: 86 kPa to 106 kPa. | - |
| Doubtful conditions | Temperature: 201C, Relative humidity: 63% to 67%, Atmospheric pressure: 86 kPa to 106 kPa. | - |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina