audio signal connector JINJIA XLR-20AW rated 250V AC 15A continuous current for electronic products
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. Designed for audio signal applications, these connectors offer reliable performance with a rated voltage of 250V AC and a continuous current rating of 15A, with a specific allowance for 30A audio signals at a 50% duty cycle. It is crucial to note that SPEAKON connectors are not to be used as AC mains or power supply connectors.
Product Attributes
- Brand: Jinjiarun Electronic Technology Co., Ltd
- Origin: Shenzhen, China
- Document Number: JJR-WI-48
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Category | Property | Test Condition | Performance |
|---|---|---|---|
| Rated Values | Practical Temperature Range | -30 to +80 | |
| Humidity Range | 85% RH.MAX. | ||
| Rated Voltage and Current (MAX.) | 250V AC , 15A (continuous) 30 A audio signal, duty cycle 50% | ||
| Electrical Characteristics | Withstand Voltage | Withstand AC 4000V (50/60Hz RMS) between two non-contact terminals for 1 minute | No dielectric breakdown shall occur. |
| Insulation Resistance | Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds. | 1000 M Min. | |
| Contact Resistance | Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. | |
| Mechanical Performance | Terminal Strength | Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds. | There is no looseness, damage, etc., but the terminal deformation is acceptable. |
| Durability | Life Test | Under no load, plug in/out with a matching plug for 5000 times at a frequency of 5 times per minute. | Appearance no obvious change, destruction. Contact resistance: less than 50 m. |
| Resistance to Soldering Heat | Terminal dipped in solder at 2603 for 51 seconds. | Plastic base should not be deformed and terminals should not fall off. | |
| Solderability | Solderability | Solder temperature: 2453C. Dip time: 30.5 seconds. | Coating of solder area should be more than 95%. |
| Environment Test | Cold Test | Housing placed at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour. | Appearance no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| Heat Test | Housing stored at 802 for 96 hours, then under standard atmospheric conditions for 1 hour. | ||
| Humidity Test | Housing stored at 403 with relative humidity of 90% ~ 95% for 96 h, then under standard atmospheric conditions for 1 hour. | Appearance no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. | |
| Salt Spray Test | Salt Spray Test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. | No obvious rust in the appearance. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina