Electronic connector JINJIA XLR-26AP-10P optimized for dependable audio signal performance in devices

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to XLR jack (Combo) connectors used in electronic products. These connectors are designed for reliable audio signal transmission and integration into various electronic devices.

Product Attributes

Brand: Jinjiarun ()
Origin: Shenzhen, China
Document Number: JJR-WI-46
Issue Date: 2008-09-10
Version: A1

Technical Specifications

Section	Item	Property	Test Condition	Performance
2. Rated /	Practical temperature range	-30 to +80
	Humidity range	85% RH.MAX.
	Preservation temperature range	-10 to +40
	Rated voltage and current (MAX.)	50V AC, 3A (Type A) / 7.5A (Type B)
4. Electrical efficiency /	Withstand Voltage	AC 1500V (50/60Hz RMS) for 1 minute between non-contact terminals	No dielectric breakdown
4. Electrical efficiency /	Insulation Resistance	Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds	10000 M Min.
4. Electrical efficiency /	Contact Resistance	Measure tail end of matched terminals (Voltage max. 20mV, Current max. 100mA)		30 m MAX.
5. Mechanical Performance /	Insertion and withdrawal forces (Rate: 2 mm/s)	XLR: Insertion: 35 N max. Withdrawal: 2 N min.
		JACK: Insertion: 40 N max. Withdrawal: 5 N min.
	Terminal Strength	Withstand a force of 0.5 kgf for 10 seconds per terminal	No looseness, damage (deformation acceptable)
6. Durability /	Life test	Rotate and plug/unplug with matching plug for 1000 times (frequency: 5 times/min) under no load condition	Appearance: No obvious change, destruction. Contact resistance:
7. Solderability /	Resistance to soldering heat	Dip terminal in solder at 2603 for 51 seconds	Plastic base not deformed, terminals not detached
7. Solderability /	Solderability	Dip in solder at 2453C for 30.5 seconds	Solder coating area > 95%
8. Environment test /	Cold test	-30 3C for 96 hours, then 1 hour under standard conditions	Appearance: No obvious change. Contact resistance: 50 m. Insulation resistance: 500 M. Withstand voltage: AC 1000V.
	Heat test	802 for 96 hours, then 1 hour under standard conditions
	Humidity test	403, 90%~95% RH for 96 hours, then 1 hour under standard conditions	Appearance: No obvious change. Contact resistance: 50 m. Insulation resistance: 500 M. Withstand voltage: AC 1000V.
8. Environment test /	Salt spray test	35 2, 5 1% solution, 24 hours spray time	Appearance: No obvious rust.
9. Test condition /	Standard conditions	Temperature: 15C - 35C, Humidity: 25% - 85% RH, Pressure: 86 kPa - 106 kPa
9. Test condition /	Doubtful condition	Temperature: 201C, Humidity: 63% - 67% RH, Pressure: 86 kPa - 106 kPa
12. XLR JACK (Combo) TYPE /XLR	Type A			3A (Rated Current)
12. XLR JACK (Combo) TYPE /XLR	Type B			7.5A (Rated Current)