Durable JINJIA XLR-19P-7P XLR jack connector designed for stable electrical and mechanical performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to XLR jack (Combo) connectors used in electronic products. These connectors are designed for reliable electrical and mechanical performance in various applications.

Product Attributes

Brand: Jinjiarun
Origin: Shenzhen, China
Document Number: JJR-WI-46
Issue Date: 2008-09-10
Version: A1

Technical Specifications

Item	Property	Test Condition	Performance
2. Rated /
Practical temperature range			-30 to +80
Humidity range			85% RH.MAX.
Preservation temperature range			-10 to +40
Preservation humidity range			85% RH.MAX.
Storage condition			Ambient air free of acid, alkaline, or other corrosive gases. Storage period not exceeding 180 days.
Rated voltage and current (MAX.)	Type A		50V AC, 3A
Rated voltage and current (MAX.)	Type B		50V AC, 7.5A
Appearance			No scratches, soil, rust, or discoloration on the surface.
4. Electrical efficiency /
Withstand Voltage		AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute. No dielectric breakdown.
Insulation Resistance		Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds.	10000 M Min.
Contact Resistance		Measure at the tail end of matched terminals (voltage max 20mV, current max 100mA).	30 m MAX.
5. Mechanical Performance /
Insertion and withdrawal forces		Rate of insertion/withdrawal: 2 mm/s. Mating of complete connectors without latching device.	XLR: Insertion: 35 N max., Withdrawal: 2 N min. JACK: Insertion: 40 N max., Withdrawal: 5 N min.
Terminal Strength		Each terminal withstands 0.5 kgf for 10 seconds.	No looseness, damage. Terminal deformation acceptable.
6. Durability /
Life test		Under no load, rotate and then plug in/out with a matching plug for 1000 times (frequency: 5 times/min).	Appearance: No obvious change. Contact resistance:
7. Solderability /
Resistance to soldering heat		Terminal dipped in solder: 2603 for 51 seconds.	Plastic base not deformed, terminals not detached.
Solderability		Solder temperature: 2453C. Dip time: 30.5 seconds.	Coating of solder area > 95%.
8. Environment test /
Cold test		Housing at -30 3 C for 96 hours, then 1 hour under standard conditions.	Appearance: No obvious change. Contact resistance: 50 m. Insulation resistance: 500 M. Withstand voltage: AC 1000V.
Heat test		Housing at 802 for 96 hours, then 1 hour under standard conditions.
Humidity test		Housing at 403, 90%~95% RH for 96 hours, then 1 hour under standard conditions.	Appearance: No obvious change. Contact resistance: 50 m. Insulation resistance: 500 M. Withstand voltage: AC 1000V.
Temperature Cycling		Conditions as shown (not detailed in text), then 30 minutes at room temperature.
Salt spray test		Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after experiment.	Appearance: No obvious rust.
9. Test condition /
Standard conditions		15C~35C, 25%~85% RH, 86kPa~106kPa.
Doubtful conditions		201C, 63%~67% RH, 86kPa~106kPa.
10. Amendment /
Procedure		Requires negotiation and agreement between manufacturer and customer.
12. XLR JACK (Combo) TYPE /XLR
Type			Type A, Type B