Durable XLR jack combo JINJIA XLR-19P-10P designed for stable audio connections in electronic devices

Name: Durable XLR jack combo JINJIA XLR-19P-10P designed for stable audio connections in electronic devices
Brand: Hefei Purple Horn E-Commerce Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

XLR JACK (Combo) SPECIFICATION

This specification applies to XLR jack (Combo) which is used in electronic products. The product is designed for applications requiring reliable audio connections.

Product Attributes

Brand: Shenzhen jinjiarun Electronic Technology Co., Ltd
Origin: Shenzhen
Document Number: JJR-WI-46
Issue Date: 2008-09-10
Version: A1

Technical Specifications

Item	Property	Test Condition	Performance
2. Rated /	Practical temperature range		-30to +80
	Humidity range		85% RH.MAX.
	Rated voltage and current (MAX.)		50V AC , 3A(Type A) / 7.5A(Type B)
4. Electrical efficiency /	Withstand Voltage	Withstand AC 1500V (50/60Hz RMS) between two non-contact terminals for 1 minute	No dielectric breakdown shall occur.
4. Electrical efficiency /	Insulation Resistance	Apply 500V DC between any contactless terminal and the other terminal, with an insulation gauge and last for 1 minute 5 seconds.	10000 M Min.
4. Electrical efficiency /	Contact Resistance	Take a pair of matched terminals and measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA)	30 m MAX.
5. Mechanical Performance /	Insertion and withdrawal forces	Rate of insertion/withdrawal: 2 mm/s	XLR: Insertion: 35 N max., Withdrawal: 2 N min. JACK: Insertion: 40 N max., Withdrawal: 5 N min.
5. Mechanical Performance /	Terminal Strength	Every terminal should be capable of withstand a force of 0.5 kgf for 10 seconds.	No looseness, damage, etc., but terminal deformation is acceptable.
6. Durability /	Life test	Under the condition of no load, rotate and then plug in, rotate and then pull out with a matching plug for 1000 times in total, at a frequency of 5 times per minute.	Contact resistance: less than 50 m.
7. Solderability /	Resistance to soldering heat	The jack terminal should be dipped in solder: Temperature of solder: 2603. Dip time: 51 seconds.	After the test, the plastic base should not be deformed and the terminals should not fall off the plastic base.
7. Solderability /	Solderability	Temperature of solder: 2453C. Time of dip: 30.5 seconds.	Coating of solder area should be more than 95%.
8. Environment test /	Cold test	Place the housing for 96 hours at a low temperature of -30 3 C. Then, place it under standard atmospheric conditions for 1 hour and test.	Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
	Heat test	The housing should be stored at a temperature of 802 for 96 hours. Then it should be subjected to standard atmospheric conditions for 1 hour and test.
	Humidity test	The housing should be stored at a temperature of 403 with relative humidity of 90% ~ 95% for 96 h. Then it should be subjected to standard atmospheric conditions for 1 hour and test.	Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
9. Test condition /	Standard conditions	15C~35C, 25%~85% RH, 86kPa~106kPa. For critical judgments: 201C, 63%~67% RH, 86kPa~106kPa.