Flexible flat cable connector JUSHUO AFA10-S06VCA-00 1.0mm pitch double sided surface mount with solder tabs

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The AFA10-S**VCA-00 is a 1.0mm pitch FPC/FFC connector designed for flexible flat cable applications. It features a double-sided, surface-mount design with solder tabs and an ultra-thin profile of H2.0. This connector is suitable for a wide range of operating temperatures and electrical loads.

Product Attributes

Brand: JUSHUO ()
Origin: Shenzhen, China
Part Number: AFA10-S**VCA-00
Product Name: FPC1.0mmH2.0
Materials: Main body: LCP (Natural) UL 94V-0, Housing Lock: LCP (Black) UL 94V-0, Terminal/Contact: Phosphor Bronze (Metal surface plated with gold/tinning)
Certifications: UL 94V-0

Technical Specifications

Item	Test Condition	Specification
[3] RATINGS
Rated Voltage (MAX)		125V
Rated Current (MAX)	[AC/DC (Virtual value) 50Hz]	0.5A
Ambient temperature Range		-45 +85
[4] PERFORMANCE
4.1 Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	20 m MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500M MIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of circuits)	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN
Terminal/Housing Retention Force	Pull the terminal at the speed rate of 253mm per minute.	3.92N MIN
4.3 Environmental and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.	Contact Resistance: 60 m MAX
Temperature Rise	Carrying rated current load. (UL 498)	Temperature Rise: 30 MAX
Vibration	DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes.	Discontinuity: 1 ms MAX. Appearance: No Damage
Shock	DC 1mA energized; 490m/s {50G}, 3 strokes in each X,Y,Z axes.	Discontinuity: 1 ms MAX. Appearance: No Damage
Heat Resistance	852, 96 hours, then return to room temperature for 1-2 hours.	Contact Resistance: 60 m MAX Appearance: No Damage
Cold Resistance	-402, 96 hours, then return to room temperature for 1-2 hours.	Contact Resistance: 60 m MAX Appearance: No Damage
Humidity	Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature.	Insulation Resistance: 20 M MIN Appearance: No Damage
Temperature Cycling	5 cycles of: a) -452 (30 minutes) b) 852 (30 minutes), with 10-15 minutes at room temperature between cycles.	Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion
Salt Spray	484 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry.	Contact Resistance: 60 m MAX Appearance: No Damage
SO2 Gas	24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX Appearance: No Damage
NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 m MAX
Solder Ability	Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2 mm from terminal tip.	Solder Wetting: 95% coverage
Resistance to Soldering Heat	Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip.	Appearance: No Damage, Deformation