2.0mm pitch horizontal SMT connector model JUSHUO AFC20-S02ACA-00 rated 250V AC DC and 2.0A current
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product acknowledgment document details the specifications for the 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00. It covers standard ratings, environmental characteristics, electrical properties, mechanical performance, and packaging details for Shenzhen Jushuo Electronic Co., Ltd.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Product Name: 2.0mm
- Product Model: AFC20-S**ACA-00 (** indicates PIN count)
- Version: 1
- Certifications: ROHS compliant
Technical Specifications
| Item | Specifications | Requirements |
| Standard Rating | Rated Voltage: 250V AC/DC Rated Current: 2.0A Operating Temperature Range: -25+105 Operating Humidity Range: | |
| Environmental Protection | Complies with ROHS requirements | |
| Packing | Inner packing: Joint and several, Outer packing: Carton, sealed | |
| Transport | Any method allowed, avoid rain/snow/sunlight, no collision/extrusion. Ambient temperature: -20 to +50 | |
| Storage | Ambient temperature: -20+50, Relative humidity: 90%, free from corrosive gases | |
| Part Name/Material | Base: 2.0 LCP E130i Pin: 2.0 Brass Stator: 2.0 Brass | |
| Appearance | Plastic parts: free of scars, discoloration, cracks, burrs, flash, material shortage, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage. | |
| Electrical Characteristics: Contact Resistance | Test Method: Plugged connector, tested with contact resistance meter. Requirement: 20m Max | |
| Electrical Characteristics: Insulation Resistance | Test Method: Plugged connector, 1000V DC for 1 min between adjacent contacts and between contacts and enclosure. Requirement: 1000M Min | |
| Electrical Characteristics: Withstand Voltage | Test Method: Plugged connector, 1000V AC for 1 min between adjacent contacts and between contacts and enclosure. Requirement: No breakdown or flashover | |
| Environmental Characteristics: Heating Test | Test Method: +1052 for 96H, then 1-2H at normal temp. Requirements: Appearance no damage, Contact Resistance: 30m Max | |
| Environmental Characteristics: Cold Tolerance Test | Test Method: -252 for 96H, then 1-2H at normal temp. Requirements: Appearance no damage, Contact Resistance: 30m Max | |
| Environmental Characteristics: Moisture Resistance Test | Test Method: 402, 90-96% RH for 96H, then 1-2H at normal temp. Requirements: Appearance no damage, Insulation Resistance: 500M Min, Withstand Voltage: 600V AC/min MIN | |
| Environmental Characteristics: Temperature Cycle | Test Method: 5 cycles of -253 (30min), Room Temp (1H), +1053 (30min), Room Temp (1H), then 2H recovery. Requirements: Appearance no abnormality, Contact Resistance: 30m Max | |
| Environmental Characteristics: Salt Spray Test | Test Method: 51% NaCl solution, 24H continuous spray, wash with distilled water, 1-2H recovery. Requirements: Appearance no damage/corrosion (hardware: no severe rust exposing base metal; pre-plated material: slight corrosion on blanking surface allowed if performance not affected), Contact Resistance: 30m Max | |
| Mechanical Characteristics: Weldability | Test Method: Dip in 2455 tin solution for 2.50.5 seconds. Requirement: Tin coverage 95% | |
| Mechanical Characteristics: Soldering Resistance | Test Method: Connector on PCB, reflow or wave soldering at 2605 for 51S. Requirements: Plastic parts no obvious deformation/damage/blistering, Electrical characteristics meet specifications. | |
| Mechanical Characteristics: Pin Fixing Force | Test Method: Fix pin holder, apply force at 253mm/min until pin withdraws. Requirement: Single pin 10N Min | |
| Mechanical Characteristics: Terminal Retention in Plastic Parts | Test Method: Terminal in socket, pull out at 253mm/min along wire direction. Requirement: Single terminal 7N Min | |
| Mechanical Characteristics: Mechanical Life | Test Method: Plug/unplug 50 times at 10 times/min without power. Requirement: Contact Resistance: 30m Max | |
| Mechanical Characteristics: Insertion/Extraction Force | Test Method: Fit socket/terminal, insert/extract on same axis as pin holder (remove socket lock), speed 205mm/min. Requirements: See table below | |
| Insertion/Extraction Force Table | Pos 1: Insert 4.00N, Pull Out 1.50N Pos 2: Insert 24.00N, Pull Out 6.00N Pos 3: Insert 28.00N, Pull Out 7.50N Pos 4: Insert 32.00N, Pull Out 9.00N Pos 5: Insert 36.00N, Pull Out 10.50N Pos 6: Insert 40.00N, Pull Out 12.00N Pos 7: Insert 44.00N, Pull Out 13.50N Pos 8: Insert 48.00N, Pull Out 15.00N Pos 9: Insert 52.00N, Pull Out 16.50N Pos 10: Insert 56.00N, Pull Out 18.00N Pos 11: Insert 60.00N, Pull Out 19.50N Pos 12: Insert 64.00N, Pull Out 21.00N Pos 13: Insert 68.00N, Pull Out 22.50N Pos 14: Insert 72.00N, Pull Out 24.00N Pos 15: Insert 76.00N, Pull Out 25.50N Pos 16: Insert 80.00N, Pull Out 27.00N |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina