Flexible Flat Cable Connector JUSHUO AFE07-S15FMA-HF 03mm Pitch Featuring Front Flip Lock Mechanism

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The AFE07-S**FMA-HF is a 0.3mm pitch FPC/FFC connector with a front-flip locking mechanism, designed for flexible flat cable applications. It offers reliable electrical and mechanical performance for various operating conditions.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONICS CO.,LTD
Origin: China
Material: Main body: LCP (Natural) UL 94V-0, Housing Lock: LCP (Black) UL 94V-0, Terminal/Contact: Phosphor Bronze, Metal Surface: Gold Plated
Color: Black (Housing Lock)
Certifications: UL 94V-0

Technical Specifications

Item	Test Condition	Requirement
4.1 Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	≤20 mΩ MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500MΩ MIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 25±3mm/minute.	Locking: 1.96n (N) MAX, Withdrawal: 0.49n (N) MIN
Terminal/Housing Retention Force	Pull the terminal at the speed rate of 25 ± 3mm per minute	3.92N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute	Contact Resistance: 60 mΩ MAX
Temperature Rise	Carrying rated current load. (UL 498)	Temperature Rise: 30 °C MAX
Vibration	DC 1mA energized state; Vibration amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours in each X.Y.Z. axes.	Discontinuity: 1 ms MAX. Appearance: No Damage
Shock	DC 1mA energized state; 490m/s²{50G} shock, 3 strokes in each X.Y.Z. axes.	Discontinuity: 1 ms MAX. Appearance: No Damage
Heat Resistance	Mate applicable FPC/FFC; placed in 85±2 air for 96 hours; then returned to room temperature for 1-2 hours.	Contact Resistance: 60 mΩ MAX. Appearance: No Damage
Cold Resistance	Mate applicable FPC/FFC; placed in -40±2 air for 96 hours; then returned to room temperature for 1-2 hours.	Contact Resistance: 60 mΩ MAX. Appearance: No Damage
Humidity	Mate applicable FPC/FFC; placed in 40±2, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature.	Insulation Resistance: 20 MΩ MIN. Appearance: No Damage
Temperature Cycling	Mate FPC/FFC; 5 cycles of: -45±2 for 30 min; normal temp/humidity for 10-15 min; 85±2 for 30 min; normal temp/humidity for 10-15 min.	Contact Resistance: 60 mΩ MAX. Appearance: No Damage, Corrosion
Salt Spray	Mate FPC/FFC; 48±4 hours exposure to a salt spray from the 5±1% solution at 35±2. Washed with room temperature water after test and dried.	Contact Resistance: 60 mΩ MAX. Appearance: No Damage
SO2 Gas Resistance	Mate FPC/FFC; 24 hours exposure to 50±5ppm SO2 gas at 40±2.	Contact Resistance: 60 mΩ MAX. Appearance: No Damage
NH3 Gas Resistance	Mate FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 mΩ MAX. Appearance: No Damage
Solder Ability	Immersed 0.2 mm from terminal tip into 235±5 tin bath for 2±0.5 sec.	Solder Wetting: ≥95% of wetting area.
Resistance to Soldering Heat	Immersed 0.2 mm from terminal tip into 260±5 tin bath for 5±0.5 sec.	Appearance: No Damage, Deformation