0.8mm Pitch Horizontal SMT Connector JUSHUO AFC08-S06QCA-00 Electrical and Mechanical Specifications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product acknowledgment document details the specifications for the 0.8mm pitch horizontal SMT connector, AFC08-S**QCA-00. It covers standard ratings, packaging, transport, storage, component materials, appearance, electrical characteristics, environmental characteristics, and mechanical properties. This specification is applicable to the 0.8 series products.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: Shenzhen, China
Product Name: 0.8mm
Product Model: AFC08-S**QCA-00
Version: 1 1 version
Environmental Compliance: ROHS

Technical Specifications

Item	Specifications	Requirements
Standard Rating
Rated Voltage	50V
Rated Current	0.5A AC/DC
Operating Temperature Range	-2585
Operating Humidity Range	Relative humidity is below 90%
Component Material
Part Name	Model	Material
Base	0.8	LCP E130i
Pin	0.8	Phosphor copper
Stator	0.8	Phosphor copper
Electrical Characteristics
Contact Resistance	Test Method: Plug in the connector and test with a contact resistance meter.	20m Max
Insulation Resistance	Test Method: Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	100M Min
Withstand Voltage	Test Method: Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
Environmental Characteristics
Heating Test	Test Method: Place plug connector in +1052 environment for 96H, then test after 1-2H recovery.	Appearance: no damage; Contact Resistance: 30m Max
Cold Tolerance Test	Test Method: Place plug connector in -252 environment for 96H, then test after 1-2H recovery.	Appearance: no damage; Contact Resistance: 30m Max
Moisture Resistance Test	Test Method: Place plug connector in 402, 90-96% RH environment for 96H, then test after 1-2H recovery.	Appearance: no damage; Insulation Resistance: 50M MIN; Withstand Voltage: 300V AC/minute MIN
Temperature Cycle	Test Method: 5 cycles of -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H), then 2H recovery.	Appearance: no abnormality; Contact Resistance: 30m Max
Salt Spray Test	Test Method: Continuous spray with 51% NaCl solution for 24H, then wash with distilled water and recover for 1-2H.	Appearance: no damage, corrosion; Contact Resistance: 30m Max
Weldability	Test Method: Dip welded part in 2455 tin solution for 2.50.5 seconds.	Tin coverage area: 95% or more
Soldering Resistance	Test Method: Reflow or wave soldering at 2605 for 51S.	1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications.
Mechanical Properties
Pin Fixing Force	Test Method: Apply force to pin end at 253mm/min rate until pin withdraws.	Single pin: 5N Min
Terminal Retention in Plastic Parts	Test Method: Pull terminal from socket at 253mm/min rate along wire direction.	Single terminal: 5N Min
Mechanical Life	Test Method: Plug and unplug 30 times at 10 times/min speed without power.	Contact Resistance: 30m Max
Insertion/Extraction Force	Test Method: Fit socket and terminal, test insertion/extraction on the same axis (speed: 205mm/min), remove socket lock.	See table below for specific forces per position.
Insertion Force (N)	1: 3.00, 2: 8.00, 3: 11.00, 4: 14.00, 5: 17.00, 6: 20.00, 7: 23.00, 8: 26.00, 9: 29.00, 10: 32.00, 11: 35.00, 12: 38.00, 13: 41.00, 14: 44.00, 15: 47.00, 16: 50.00
Extraction Force (N)	1: 0.50, 2: 2.00, 3: 2.50, 4: 3.00, 5: 3.50, 6: 4.00, 7: 4.50, 8: 5.00, 9: 5.50, 10: 6.00, 11: 6.50, 12: 7.00, 13: 7.50, 14: 8.00, 15: 8.50, 16: 9.00