0.5mm Pitch FPC FFC Connector Series Locking Mechanism JUSHUO AFC01-S60FCA-HF Electrical Performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The AFC01-S**FCA-HF is a 0.5mm pitch FPC/FFC connector with a series locking mechanism, designed for flexible flat cable applications. It offers reliable electrical and mechanical performance within a specified temperature range.

Product Attributes

Brand: JUSHUO ()
Origin: Shenzhen, China
Certifications: HF Halogen-Free
Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
Color: Black (Housing Lock), Natural (Main body)

Technical Specifications

Item	Requirement	Test Condition
Ratings
Rated Voltage (MAX)	50V
Rated Current (MAX)	0.5A (AC/DC, 50Hz virtual value)
Ambient temperature Range	-45 +85
Electrical Performance
Contact Resistance	20 m MAX	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.
Insulation Resistance	500M MIN	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.
Dielectric Strength	No Breakdown	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.
Mechanical Performance
Locking and Withdrawal Force	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN	Insert and extract applicable FFC at the speed rate of 253mm/minute. (for 0.3mm thick FFC)
Terminal/Housing Retention Force	3.92N MIN	Pull the terminal at the speed rate of 253mm per minute.
Environmental Performance and Others
Repeated Insertion and Withdrawal	Contact Resistance: 60 m MAX	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.
Temperature Rise	30 MAX	Carrying rated current load. (UL 498)
Vibration	Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage	DC 1mA energized state; vibration along XYZ axes, amplitude 1.5mm, frequency 10-55-10Hz/min, duration 2 hours.
Shock	Discontinuity: 1 ms MAX. Appearance: No Damage	DC 1mA energized state; 490m/s{50G} shock in 6 directions, 3 times each.
Heat Resistance	Contact Resistance: 60 m MAX Appearance: No Damage	Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours.
Cold Resistance	Contact Resistance: 60 m MAX Appearance: No Damage	Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours.
Humidity	Insulation Resistance: 20 M MIN Contact Resistance: 60 m MAX Appearance: No Damage	Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature.
Temperature Cycling	Contact Resistance: 60 m MAX	5 cycles of: a) -452 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature between cycles.
Salt Spray	Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion	484 hours exposure to a salt spray from a 51% solution at 352. Washed with room temperature water after test and dried.
SO2 Gas Resistance	Contact Resistance: 60 m MAX Appearance: No Damage	24 hours exposure to 505ppm SO2 gas at 402.
NH3 Gas Resistance	Contact Resistance: 60 m MAX	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
Solderability	Solder Wetting: 95% coverage	Immersed in a 2355 tin bath for 20.5 sec, 0.2mm from terminal tip.
Resistance to Soldering Heat	Appearance: No Damage, Deformation	Immersed in a 2605 tin bath for 50.5 sec, 0.2mm from terminal tip.