JUSHUO AFE07 S45FMA HF 0.3mm Pitch Front Flip Locking Connector for Flexible Flat Cable Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 0.3mm Pitch FPC/FFC Connectors (series Locking) from Shenzhen Jushuo Electronics Co., Ltd. These connectors are designed for flexible flat cable applications and feature a front-flip locking mechanism with a height of H0.9mm.

Product Attributes

Brand: Jushuo ()
Origin: Shenzhen, China
Material: Main body: LCP (Natural) UL 94V-0; Housing Lock: LCP (Black) UL 94V-0; Terminal/Contact: Phosphor Bronze (Metal surface plated gold)
Color: Black (Housing Lock)
Certifications: UL 94V-0

Technical Specifications

Item	Specification	Test Condition
Ratings
Rated Voltage (MAX)	50V
Rated Current (MAX)	0.5A [AC/DC (Virtual value) 50Hz]
Ambient Temperature Range	-45 +85
Electrical Performance
Contact Resistance	20 m MAX	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.
Insulation Resistance	500M MIN	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.
Dielectric Strength	No Breakdown	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.
Mechanical Performance
Locking Force	1.96*n (N) MAX	Insert and extract applicable FFC at the speed rate of 253mm/minute.
Withdrawal Force	0.49*n (N) MIN
Terminal/Housing Retention Force	3.92N MIN	Pull the terminal at the speed rate of 25 3mm per minute.
Environmental Performance and Others
Repeated Insertion and Withdrawal	Contact Resistance: 60 m MAX	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.
Temperature Rise	30 MAX	Carrying rated current load. (UL 498)
Vibration	Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage	DC 1mA powered state; Vibration along XYZ three axes; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours.
Shock	Discontinuity: 1 ms MAX; Appearance: No Damage	DC 1mA powered state; 490m/s {50G} shock in each of the 6 mutually perpendicular directions; 3 times each.
Heat Resistance	Contact Resistance: 60 m MAX; Appearance: No Damage	Mate applicable FPC/FFC; Place in 852 air for 96 hours; then return to room temperature for 1-2 hours.
Cold Resistance	Contact Resistance: 60 m MAX; Appearance: No Damage	Mate applicable FPC/FFC; Place in -402 air for 96 hours; then return to room temperature for 1-2 hours.
Humidity	Insulation Resistance: 20 M MIN; Appearance: No Damage	Mate applicable FPC/FFC; Place in 402, 90-95% relative humidity air for 96 hours; measure within 0.5 hours after returning to room temperature.
Temperature Cycling	Contact Resistance: 60 m MAX	5 cycles of: 30 minutes at -452, 10-15 minutes at room temp/humidity, 30 minutes at 852, 10-15 minutes at room temp/humidity.
Salt Spray	Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion	484 hours exposure to a salt spray from the 51% solution at 352. After the test, wash with room temperature water and dry at room temperature.
SO2 Gas Resistance	Contact Resistance: 60 m MAX; Appearance: No Damage	24 hours exposure to 505ppm SO2 gas at 402.
NH3 Gas Resistance	Contact Resistance: 60 m MAX	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
Solder Ability	Solder Wetting: 95% of wetting area	Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2 mm from terminal tip.
Resistance to Soldering Heat	Appearance: No Damage, Deformation	Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip.