JUSHUO AFE07 S23FMA HF 0.3mm Pitch FPC FFC Connector Featuring Front Insertion and Rear Flip Locking

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Specification

This specification covers the 0.3mm Pitch FPC/FFC Connectors (series Locking) with a height of H0.9mm. These connectors are designed for flexible flat cable (FFC) applications, featuring a front-insertion, rear-flip locking mechanism.

Product Attributes

Brand: JUSHUO ()
Origin: Shenzhen, China
Materials:
- Main body: LCP (Natural color), UL 94V-0
- Housing Lock: LCP (Black), UL 94V-0
- Terminal/Contact: Phosphor Bronze, Metal surface plated with Gold
Certifications: UL 94V-0

Technical Specifications

Item	Test Condition	Requirement
4.1 Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	≤20 mΩ MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500MΩ MIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 25±3mm/minute.	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN
Terminal/Housing Retention Force	Pull the terminal at the speed rate of 25±3mm per minute.	3.92N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.	Contact Resistance: 60 mΩ MAX
Temperature Rise	Carrying rated current load. (UL 498)	30 °C MAX
Vibration	DC 1mA energized state; vibration along X, Y, Z axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours.	Discontinuity: 1 ms MAX. Appearance: No Damage
Shock	DC 1mA energized state; 6 mutually perpendicular directions; 490m/s² {50G} impact; 3 times each.	Discontinuity: 1 ms MAX. Appearance: No Damage
Heat Resistance	Mate applicable FPC/FFC; place in 85±2°C air for 96 hours; then return to room temperature for 1-2 hours.	Contact Resistance: 60 mΩ MAX Appearance: No Damage
Cold Resistance	Mate applicable FPC/FFC; place in -40±2°C air for 96 hours; then return to room temperature for 1-2 hours.	Contact Resistance: 60 mΩ MAX Appearance: No Damage
Humidity	Mate applicable FPC/FFC; place in 40±2°C, 90-95% relative humidity air for 96 hours; measure within 0.5 hours after returning to room temperature.	Insulation Resistance: 20 MΩ MIN Appearance: No Damage
Temperature Cycling	Mate applicable FPC/FFC; 5 cycles of: -45±2°C for 30 min; room temp/humidity for 10-15 min; 85±2°C for 30 min; room temp/humidity for 10-15 min.	Contact Resistance: 60 mΩ MAX Appearance: No Damage, Corrosion
Salt Spray	Mate applicable FPC/FFC; 48±4 hours exposure to a salt spray from the 5±1% solution at 35±2°C. After test, wash with room temp water and dry.	Contact Resistance: 60 mΩ MAX Appearance: No Damage
SO2 Gas Resistance	Mate applicable FPC/FFC; 24 hours exposure to 50±5ppm SO2 gas at 40±2°C.	Contact Resistance: 60 mΩ MAX Appearance: No Damage
NH3 Gas Resistance	Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 mΩ MAX Appearance: No Damage
Solder Ability	Immerse terminal tip 0.2mm from base plane into 235±5°C tin bath for 2±0.5 sec.	Solder Wetting: ≥95% of wetting area
Resistance to Soldering Heat	Immerse terminal tip 0.2mm from base plane into 260±5°C tin bath for 5±0.5 sec.	Appearance: No Damage, Deformation