Secure Latch Horizontal SMT Connector 1.25mm Pitch JUSHUO GH125-S03DCA-00 for Circuit Integration

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product acknowledgment document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It outlines standard ratings, packaging, transportation, storage, component materials, appearance, electrical characteristics, environmental characteristics, and mechanical properties. The product complies with ROHS environmental requirements.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: Shenzhen, China
Product Name: 1.25mm pitch horizontal SMT connector (with latch)
Product Model: GH125-S**DCA-00 (** indicates PIN count)
Version: 1 1 version
Certifications: ROHS compliant

Technical Specifications

Item	Specifications	Test Method	Performance Requirements
Standard Rating
Rated Voltage	50V
Rated Current	1.0A AC/DC
Operating Temperature Range	-2585
Operating Humidity Range	Relative humidity is below 90%
Component Material
Part Name	Model	Material
Base	GH LCP E130i
Pin	GH	Phosphor copper
Stator	GH	Phosphor copper
Electrical Characteristics
Contact Resistance		Plug in the connector and test with a contact resistance meter.	20m Max
Insulation Resistance		Apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	500M Min
Withstand Voltage		Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
Environmental Characteristics
Heating Test		Place in +852 for 96H, then in normal environment for 1-2H.	Appearance: no damage; Contact Resistance: 60m Max
Cold Tolerance Test		Place in -252 for 96H, then in normal environment for 1-2H.	Appearance: no damage; Contact Resistance: 60m Max
Moisture Resistance Test		Place in 402, 90-96% RH for 96H, then in normal environment for 1-2H.	Appearance: no damage; Insulation Resistance: 60M MIN; Withstand Voltage: 250V AC/minute MIN
Temperature Cycle		5 cycles of -25 (30min) -> Room Temp (1H) -> +85 (30min) -> Room Temp (1H), then recover for 2H.	Appearance: no abnormality; Contact Resistance: 60m Max
Salt Spray Test		Continuous spray with 51% NaCl solution for 24H, wash with distilled water, recover for 1-2H.	Appearance: no damage/corrosion; Contact Resistance: 60m Max
Weldability		Dip in 2605 tin solution for 2.50.5 seconds.	Tin area above 95%
Soldering Resistance		Reflow or wave soldering at 2605 for 51S.	1. No obvious deformation/damage/blistering of plastic parts. 2. Electrical characteristics must meet specifications.
Mechanical Properties
Pin Fixing Force		Apply force at 253mm/min until pin withdraws.	Single pin 5N Min
Terminal Retention in Plastic Parts		Pull out terminal at 253mm/min along wire direction.	Single terminal: 7N Min
Mechanical Life		Plug and unplug 30 times at 10 times/min without power.	Contact Resistance: 80m Max
Terminal Crimp Lead Line Strength		Axial pullout force at 253mm/min.	26AWG: 17.8N; 28AWG: 8.9N; 30AWG: 4.4N; 32AWG: 2.2N
Insertion/Pullout Force		Fit hole seat and terminal, test insertion/removal on same axis. Remove lock of hole seat. Test speed: 205mm/min.	Insertion Force: 2N(Per pin); Pullout Force: 0.3N(Per pin)