Flexible Flat Cable Connector JUSHUO AFC08-S20ECA-00 0.8mm Pitch FPC FFC Series Locking Connector

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Specification

This specification covers the 0.8mm Pitch FPC/FFC Connectors (series Locking), specifically the AFC08-S**ECA-00 model. These connectors are designed for flexible flat cable applications, offering a reliable connection solution.

Product Attributes

Brand: JUSHUO ()
Origin: Shenzhen, China
Materials: Main body: LCP (UL 94V-0), Housing Lock: LCP (UL 94V-0), Terminal/Contact: Phosphor Bronze
Plating: Tin plating on metal surfaces
Certifications: RoHS compliant

Technical Specifications

Item	Specification	Test Condition	Requirement
4.1 Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	20 m MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500M MIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 253mm/minute.	Locking: 1.96n (N) MAX, Withdrawal: 0.49n (N) MIN
Terminal/Housing Retention Force	Pull the terminal at the speed rate of 25 3mm per minute	3.92N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute	Contact Resistance: 60 m MAX
Temperature Rise	Carrying rated current load. (UL 498)	Temperature Rise: 30 MAX
Vibration	DC 1mA energized state; vibration along XYZ axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours	Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX, Appearance: No Damage
Shock	DC 1mA energized state; 490m/s2{50G} impact in 6 directions; 3 times each	Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX, Appearance: No Damage
Heat Resistance	Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours	Contact Resistance: 60 m MAX, Appearance: No Damage
Cold Resistance	Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours	Contact Resistance: 60 m MAX, Appearance: No Damage
Humidity	Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature	Contact Resistance: 60 m MAX, Insulation Resistance: 20 M MIN, Appearance: No Damage
Temperature Cycling	5 cycles of: -452 for 30 minutes; Room temp. 10-15 minutes; 852 for 30 minutes; Room temp. 10-15 minutes	Contact Resistance: 60 m MAX, Appearance: No Damage, Corrosion
Salt Spray	Mate applicable FPC/FFC; 484 hours exposure to a salt spray from the 51% solution at 352. Post-test rinse with room temp. water and dry.	Contact Resistance: 60 m MAX, Appearance: No Damage
SO2 Gas Resistance	Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX, Appearance: No Damage
NH3 Gas Resistance	Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 m MAX, Appearance: No Damage
Solderability	Terminal tip immersed in 2355 tin bath for 20.5 sec. (0.2 mm from terminal tip)	Solder Wetting: 95% coverage
Resistance to Soldering Heat	Terminal tip immersed in 2605 tin bath for 50.5 sec. (0.2 mm from terminal tip)	Appearance: No Damage, Deformation
3 Ratings
Rated Voltage (MAX)			50V
Rated Current (MAX)	[AC/DC(virtual value)50Hz]		0.5A
Ambient Temperature Range			-45 +85