Flexible flat cable connector 1mm pitch double sided surface mount type solder tabs included JUSHUO AFA10-S08VCA-00

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The AFA10-S**VCA-00 is a 1.0mm pitch FPC/FFC connector designed for flexible flat cable applications. It features a double-sided, surface-mount design with a super-thin profile (H2.0) and includes solder tabs.

Product Attributes

Brand: JUSHUO ()
Origin: Shenzhen, China
Product Name: FPC (FPC Connector)
Part Number: AFA10-S**VCA-00
Material (Main Body): LCP (Natural) UL 94V-0
Material (Housing Lock): LCP (Black) UL 94V-0
Material (Terminal/Contact): Phosphor Bronze
Surface Treatment (Terminal): Gold Plated/Tinning
Certifications: UL 94V-0

Technical Specifications

Item	Specification	Requirement
1. Ratings
Rated Voltage (MAX)		125V
Rated Current (MAX)	[AC/DC (Virtual value) 50Hz]	0.5A
Ambient Temperature Range		-45 +85
2. Electrical Performance
Contact Resistance	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	20 m MAX
Insulation Resistance	Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500M MIN
Dielectric Strength	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.	No Breakdown
3. Mechanical Performance
Locking and Withdrawal Force	Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions)	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN
Terminal/Housing Retention Force	Pull the terminal at the speed rate of 253mm per minute.	3.92N MIN
4. Environmental and Other Performance
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.	Contact Resistance: 60 m MAX
Temperature Rise	Carrying rated current load. (UL 498)	30 MAX
Vibration	DC 1mA energized state; vibration along X, Y, Z axes; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours in each axis.	Discontinuity: 1 ms MAX. Appearance: No Damage
Shock	DC 1mA energized state; 490m/s {50G} shock in 6 directions perpendicular to the mating axis; 3 times each.	Discontinuity: 1 ms MAX. Appearance: No Damage
Heat Resistance	Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours.	Contact Resistance: 60 m MAX Appearance: No Damage
Cold Resistance	Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours.	Contact Resistance: 60 m MAX Appearance: No Damage
Humidity	Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature.	Insulation Resistance: 20 M MIN Appearance: No Damage
Temperature Cycling	Mate applicable FPC/FFC; 5 cycles of: 30 min @ -452, 10-15 min @ Room Temp/Humidity, 30 min @ 852, 10-15 min @ Room Temp/Humidity.	Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion
Salt Spray	Mate applicable FPC/FFC; 484 hours exposure to 51% salt spray at 352. Wash with room temp water after test; dry at room temp.	Contact Resistance: 60 m MAX
SO2 Gas Resistance	Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX Appearance: No Damage
NH3 Gas Resistance	Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 m MAX
Solder Ability	Dip 0.2 mm from terminal tip into 2355 tin bath for 20.5 sec.	Solder Wetting: 95% coverage
Resistance to Soldering Heat	Dip 0.2 mm from terminal tip into 2605 tin bath for 50.5 sec.	Appearance: No Damage, Deformation