1.0mm Pitch Horizontal SMT Connector JUSHUO AFC10-S14QCA-00 Electrical and Mechanical Specifications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Acknowledgement
Customer: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Product Name: 1.0mm (1.0mm Pitch Horizontal SMT Connector)
Material Number: AFC10-S**QCA-00 (** indicates PIN count)
Version: 1 (1 version)
Page: 2 of 8
Product Overview
This product specification applies to the 1.0 series of connectors. It details the standard ratings, environmental characteristics, electrical characteristics, mechanical properties, and packaging requirements for the AFC10-S**QCA-00 model, a 1.0mm pitch horizontal SMT connector designed for various electronic applications.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
- Origin: China (implied by company address)
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Test Method | Performance Requirement |
|---|---|---|---|
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 0.5A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Packaging, Transport, Storage | |||
| Packing | Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport Environment Temperature | -20 to +50 | ||
| Storage Environment Temperature | -20+50 | ||
| Storage Humidity | Not more than 90% | ||
| Storage Atmosphere | No acid, alkaline and other corrosive gases | ||
| Part Name/Material | |||
| Part Name | Model | Material | |
| Base | 1.0 LCP E130i | LCP | |
| Reed | 1.0 | Phosphor copper | |
| Stator | 1.0 | Phosphor copper | |
| Appearance | |||
| Plastic parts: no obvious scars, mottled, cracked, burr, flash, lack of material, or deformation affecting use. Metal parts: smooth, no rust, oxidation, peeling, blackening, or obvious mechanical damage. | |||
| Electrical Characteristics | |||
| Contact Resistance | 20m Max | Measure between two terminals of the connector after mating. | |
| Insulation Resistance | 100M Min | Apply 500V DC between adjacent contacts and between contacts and enclosure for 1 minute after mating. | |
| Withstand Voltage | No breakdown and flashover | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute after mating. | |
| Environmental Characteristics | |||
| Heating Test | Appearance: no damage. Contact resistance: 30m Max | Place mated connector in +1052 environment for 96H, then recover for 1-2H. | |
| Cold Tolerance Test | Appearance: no damage. Contact resistance: 30m Max | Place mated connector in -252 environment for 96H, then recover for 1-2H. | |
| Moisture Resistance Test | Appearance: no damage. Insulation resistance: 50M MIN. Withstand voltage: 200VAC/min | Place mated connector in 402, 90-96% RH environment for 96H, then recover for 1-2H. | |
| Temperature Cycle | Appearance: no abnormality. Contact resistance: 30m Max | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover for 2H. | |
| Salt Spray Test | Appearance: no damage or corrosion. Contact resistance: 30m Max | Continuous spray with 5%1% NaCl solution for 24H, wash with distilled water, recover for 1-2H. | |
| Weldability | Tin area above 95% | Dip the weldable part in 2355 tin solution for 2.50.5 seconds. | |
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB and subject to 2605 reflow or wave soldering for 51S. | |
| Mechanical Properties | |||
| PIN Fixing Force | Single PIN: 7N Min | Apply force on pin front end at a rate of 253mm/min until pin withdraws. | |
| Terminal Retention in Plastic Parts | Single terminal: 5N Min | Pull terminal from socket at a rate of 253mm/min along conductor direction. | |
| Mechanical Life | Contact resistance: 30m Max | Plug and unplug 50 times at a speed of 10 times/min without power. | |
| Insert/Pull Force (N) | See table below | Mate and test on the same axis at 205mm/min. Remove hole seat lock during test. | |
| PIN Position | Insert (N) | Pull Out (N) | PIN Position | Insert (N) | Pull Out (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina